Product Catalog
  • Commercial Grade Solid Silicone

    Commercial grade solid silicone rubber sheet is the most commonly used type of silicone rubber.  Commercial grade solid silicone sheeting is designed to be used in applications where physical properties are not critical but extreme temperature resistance is still needed. 

    Silicone rubber possesses a multitude of desirable characteristics:

    • chemical resistance
    • high temperature performance
    • thermal and electrical resistance
    • long-term resiliency
    • easy fabrication
    • UV & Ozone resistance

    Commercial grade silicone rubber is commonly used in the gasketing, insulating, packaging, thermal shielding, heat sealing, vibration and sound dampening and sealing industries

    *Minimums may apply / PLEASE ADVISE IF YOU WOULD LIKE SHEETS OR CONT. ROLL FOR ORDERS OF MORE THAN 1 YARD

  • FDA Approved Solid Silicone Sheet

    FDA Approved Solid Silicone Rubber has superb chemical resistance, high temperature performance, good thermal and electrical resistance, long-term resiliency, and easy fabrication. It also possesses excellent UV and ozone resistance. This material is low volatile, peroxide free and does not discolor over time. Silicone is odorless, tasteless, chemically inert and non-toxic. It offers all FDA approved ingredients, low compression set and fungus resistance.

    Silicone rubber can be used for insulating and cushioning electronic assemblies, LCD displays, sensors for lasers and assemblies, gaskets, automotive seals and hoses, shaft sealing rings, spark plug caps, vibration and sound damping, industrial rollers, press pads, thermal shielding, food and cosmetic services, heat sealing and packaging and grommets.

    *Note: This material is red in color.

  • Solid Silicone (Translucent)

    Translucent solid silicone sheet rubber can be used in a wide variety of applications.  Translucent silicone rubber is low volatile, peroxide free and does not discolor over time.  Silicone exhibits a wish list of characteristics including superb chemical resistance, high temperature performance, good thermal and electrical resistance, long-term resiliency, and easy fabrication.  It also possesses excellent UV and ozone resistance.  Translucent silicone sheeting is odorless, tastless, chemically inert and non-toxic.  It offers all FDA approved ingredients, low compression set and fungus resistance.

    Translucent Grade solid silicone sheeting meets 21 CFR 177.2600 for repeated use in contact with food.  Color is translucent.

     

  • Solid Silicone (Medical Grade)

    Medical Grade solid silicone sheet rubber is used primarily in health care applications.  The base silicone polymer has been tested to meet USP Class VI.  This premium material is low volatile, peroxide free, platinum cured and does not discolor over time.  The ingredients used to manufacture this material also meet CFR 177.2600 which certifies to the FDA regulation for materials intended for repeated use in contact with food.  Medical Grade solid silicone rubber is fungus resistant and UV and ozone resistant as well.

    Medical Grade solid silicone sheeting also meets the following specifications: USP Class VI, FDA 21 CFR 177.2600, UL 94HB flammability rating and ASTM D200.

  • Solid Silicone (Specification Grade)

    Specification Grade solid silicone sheet rubber sheet is for demading applications that require higher physical properties and a lower compression set.  This material is resistant to extreme low and high temperatures and is proven to be an excellent gasket material in harsh environments.  Specification Grade solid silicone rubber is non-toxic, chemically inert and FDA compliant.  It is also UV and ozone resistant and fungus resistant.

    Specification Grade solid silicone rubber also meets the following specifications ZZR-765 CL2A & 2B GR50, AMS 3302 and ASTM D200.

     

  • Solid Silicone Fiberglass Reinforced

    Fiberglass Reinforced Solid Silicone Rubber has superb chemical resistance, high temperature performance, good thermal and electrical resistance, long-term resiliency, and easy fabrication. It also possesses excellent UV and ozone resistance.
    Silicone is odorless, tasteless, chemically inert and non-toxic. It offers low compression set and fungus resistance.

    Common Applications: Fiberglass reinforced press pad material is typically used for flexible circuitry laminations. This process requires a resilient, non-porous sheet material suitable for operating temperatures from -100 to 550F. It can also be used for gaskets, diaphragms, and belting.

    Durometer Shore "A" Hardness. Thickness from 1/32" to 1/2". Many Grades available. Products meet many commercial, Mil-Spec, Aircraft, FDA, UL, Flame Retardant Standards. Silicone materials are Solid, Coated Fiberglass, Textured with Fabric Finish, Reinforced with Fiberglass (adds tensile strength).
    Discount for orders over $1000, $5000, $10,000. Sold by the lineal yard in continuous rolls or by the Sheet. Can also be die cut to specifications

  • Solid Silicone/Silicone Sponge (Flame Retardant)

    Flame Retardant solid silicone rubber sheet is designed to be used in applications requiring higher physical properties.  It is most commonly used in appications where self-extinguishing and resistance to flammability characteristics to certain specifications are needed.  Flame Retardant silicone rubber meets specifications: BSS7230, UL94-VO and FAR25.853.

    Like other silicone rubber products, the flame retardant series also posseses high temperature resistance, chemical resistance, ozone and UV resistance and easy fabrication.  This material is also non-toxic and fungus resistance.  

    Commercial grade silicone rubber is commonly used in the gasketing, automotive and aviation cushioning, insulating, packaging, thermal shielding, heat sealing, vibration and sound dampening and sealing industries.

     

  • Solid Silicone (Fluorosilicone)

    Fluorosilicone silicone rubber sheeting is designed to be used in applications where extreme temperatures exist.  Fluorosilicone silicone exhibits a wish list of characteristics including superb chemical resistance, high temperature performance, good thermal and electrical resistance, long-term resiliency, and easy fabrication.

  • Solid Silicone Electrically Conductive

    Electrically Conductive Grade Silicone Rubber Sheeting is designed for many different applications. It is black; carbon filled silicone sheeting that acts as a low amperage conductor and provides protection against electrostatic discharge. Silicone rubber exhibits a wish list of characteristics including superb chemical resistance, high temperature performance, good thermal and electrical resistance, long-term resiliency, and easy fabrication. It has excellent UV and ozone resistance. Silicone is odorless, tasteless, chemically inert and non-toxic. It offers low compression set and fungus resistance.  

    Common Applications: ECD silicone rubber can be used for insulating and cushioning electronic assemblies. It is also used for gaskets, heat sealing and packaging, RFI/EMI Shielding.  

    TYPICAL PROPERTIES FOR ECD SILICONE RUBBER

    Property

    Test Method

    ECD Silicone Rubber

    Specific Gravity, G/CC

    ASTM D297

    1.30

    Durometer, Shore A

    ASTM D2240

    70 +/- 5

    Tensile Strength, psi

    ASTM D412

    700

    Elongation, %

    ASTM D412

    200

    Tear, psi Die “B”

    ASTM D624

    80

    Temperature Range

    ºF

    -80 to +500

    Volume Resistivity

    (ohms/cm)

    6



  • Solid Silicone (High Temperature)

    High temperature solid silicone rubber is used in applications that a require an extremely high (+500F) temperature range for an extended period of time.  This particular products offers temperature resistance to 600F.  This material is resistant to extrememe high and low temperatures and has proven to be an excellent gasket material.

    High temperature solid silicone rubber is chemical, ozone and UV resistant.  This material offers low compression set, long-term resilency and easy fabrication.

    High temperature silicone rubber is used in gasketing, thermal and heat sheilding, insulating, packaging and many more applications.

    If you only need extended temperature resistance for short periods of time, please call about our EPC (extra-post platinum cured) silicone rubber.  It has a service life of 550F.

  • Solid Silicone (High Strength)/Overhead Press

    This High Strength solid silicone rubber sheeting is designed to be used in applications requiring high strength physical properties.  This premium material has a high tensile strength as well as excellent tear resistance.  In addition to these characteristics, the high strength silicone sheeting is also FDA approved and meets CFR 177.2600 for repeated food contact.  It is also UV and ozone resistant.

    The High Strength solid silicone rubber sheeting also meets specifications ZZR-765 CL3B GR50, AMS 3347 and ASTM D200.

  • Solid Silicone (Thermally Conductive)

    Thermally conductive solid silicone is an unsupported silicone rubber. This material offers thermal conductivity along with electrical isolation for heat transfer between PC boards and heat sinks. Thermally conductive solid silicone is a firm interface material used for applications requiring a heat protectant. These products are designed to remove the heat generated by an electronic device to the ambient environment in order to ensure the reliable operation of computers, communication equipment or similar electronic hardware. It can also be used for filling air gaps under high load force between PC boards and heat sinks.

    Thermally conductive solid silicone is available in a light blue color and is formulated to provide clean release from most surfaces.

  • Silicone Foam

    Commercial Grade silicone foam is a light density, flexible material with a smooth skin on both sides.  Silicone foam is flame-retardant and meets UL 94 VO rating.  This material can withstand a 2100°F flame for more than l0 minutes without burning through in thicknesses down to 3/8".   Silicone foam is self-extinguishing and generates very little white smoke.  Nominal density is 12 lbs./cu. ft.  Silicone foam is non-crrosive for use with metals and in hostile environment and maintains compression set.  Color is white.


    Applications: Outstanding performance in the aviation, mass transit, automotive industries, electronics, construction, furniture, fireblocks, thermal barriers, noise and vibration dampeners, insulation and high-performance gaskets or seals.
    Discounts on orders of $1000, $5000. Call, email, Chat.

  • Silicone Sponge (commercial)

    Flexible, compressible closed cell sponge is designed for high performance gasketing, thermal shielding, vibration mounts and press pads. Silicone Rubber Sponge is available with adhesive.
    Discount on orders of $500, $1000, $5000. Call, email or Chat.

  • Solid Silicone/Silicone Sponge (Flame Retardant)

    Flame retardant Fiberglass reinforced silicone sponge rubber is an excellent material for gasketing applications. The fiberglass gives it dimensional stability, which also helps in cutting close tolerance parts.
    Silicone sponge can be used for insulating and cushioning electronic assemblies. It can also be used for gaskets, seals, air filters, diaphragms, thermal shielding, cushioning for aviation, automotive and locomotive industries as well as flame-retardant applications. This silicone sponge can also be used in furnace or boiler rooms, electrical boxes, high heat, high intensity lighting and after burners. 
    Discounts on orders of $500, $1000, $5000. Call, email or LiveChat

  • Reinforced Silicone Sponge

    Fiberglass Reinforced silicone sponge rubber is used in applications requiring additional dimensional stability and higher tensile strength.  Silicone has superb chemical resistance, high temperature performance, high tensile strength, good thermal and electrical resistance, long-term resiliency, easy fabrication. Fiberglass Reinforced Silicone Sponge has excellent UV and ozone resistance. It is odorless, tasteless, non-toxic. It offers high compressibility with a low compression set.  Standard color is red. 

    Common Applications: Fiberglass reinforced silicone sponge is an excellent material for gasketing applications. Fiberglass gives dimensional stability, which helps in cutting close tolerance parts. Fiberglass Reinforced silicone sponge can be used for insulating and cushioning electronic assemblies. It can also be used for gaskets, seals, belting, air filters, and diaphragms, thermal shielding; can be used in furnace or boiler rooms, electrical boxes, high heat, high intensity lighting and after burners. 

    Fiberglass Reinforced silicone sponge meets AMS 3195


    Discounts on orders of $500, $1000, $5000. Call, email or Chat.

  • Low Compression Set Silicone Sponge Sheet

    Low compression set silicone is a soft, compressible, closed cell silicone sponge excellent for gasketing applications. It boasts superb chemical resistance, high temperature performance, good thermal and electrical resistance, long-term resiliency, and easy fabrication.

    Common applications include gaskets, seals, press pads, thermal insulation, thermal shielding, heat transfer, silk screening, print presses, and vibration mounts.

  • Silicone Sponge (Thermally COND / Low COMP)

    Thermally Conductive Silicone Sponge 72-TCD series is a thermally conductive closed cell silicone sponge rubber. This material offers thermal conductivity along with electrical isolation. It has excellent conformability to irregular surfaces and a clean release from most materials. Available in multiple thicknesses to fill various air gap heights. Its cellular structure provides extremely compliant gap filler.
    This material is recommended to fill the needs of an unsupported thermal transfer material in applications requiring clean release, enhanced thermal performance by filling air gaps, electrical isolation and vibration cushioning.  Common Applications: Gasketing and cushioning applications requiring critical thermal transfer and sealing. It can also be used for seals, press pads, computers, telecommunication, automotive electronics, military, medical, heat pipe assemblies, CD ROM cooling, thermal insulating, thermal shielding, heat transfer, decal transfer, print presses, and vibration mounts.   Discounts on orders of $1000, $5000.

     

  • Silicone Coated 1 Side / Wash Coat/Silicone Coated Fiberglass Fabric/Solar Panel Grade Materials

    Silicone rubber coated fiberglass fabric. Superior release characteristics, particularly with sticky substances. From thin (010" thick) to thick (.062" thick). Available in 1, 2 and 3 ply. Red or White Color. Silicone Coated Fabric can be custom made into continuous loop silicone BELTS for conveyance in Food & Packaging industries. Used as flaps in shrink tunnels, can be die cut into gaskets, strips, washers, insulators

  • Silicone Coated 1 Side / Wash Coat/Silicone Coated Fiberglass Fabric/Solar Panel Grade Materials

    Silicone coated fiberglass fabric has a "wash" (thin) coating on one side and regular silicone coating on the other side. Wash coat side is textured and is often used to emboss a pattern into other materials. Silicone has Superior release characteristics, particularly with sticky substances. This fabric has excellent heat (-100F to +500F), chemical & fire resistance. High friction, insulating, dielectric and non-stick properties. USDA Compliant for food processing & handling; FDA Compliant (21 CFR177.2600) Silicone Coated Fabric can be custom made into continuous loop silicone BELTS for conveyance in Food & Packaging industries. Used as flaps in shrink tunnels, can be die cut into gaskets, strips, washers, insulators. Nominal Thickness: .020" Color: Red.

  • Silicone 2 Ply, Textured - Friction Surface

    2 Ply Silicone coated fiberglass fabric. Two layers of heavy duty Silicone Coated Fiberglass are bonded together. Superior release characteristics, particularly with sticky substances. High heat, chemical resistance and durability. 2 Ply and 3 Ply Silicone Coated Fabric can be custom made into curtains, flaps, belts. Used in furnace tunnels, curtains, flaps and other applications with high heat, high durability requirements. Can be die cut into gaskets, strips, washers, insulators. Nominal thickness: .042" . Colors: Red, White, Black. Standard widths 40", 50"; Friction Surface.

  • Silicone 3 Ply, Textured - Friction Surface

    3 Ply Silicone coated fiberglass fabric. Three layers of heavy duty Silicone Coated Fiberglass are bonded together. Superior release characteristics, particularly with sticky substances. High heat, chemical resistance and durability. 2 Ply and 3 Ply Silicone Coated Fabric can be custom made into curtains, flaps, belts. Used in furnace tunnels, curtains, flaps and other applications with high heat, high durability requirements. Grommets for hanging can be added. Can be die cut into gaskets, strips, washers, insulators. Nominal thickness: .060" . Colors: Red, White. Standard widths 40", 50"; Friction Surface. Call, email or Chat for Quote & information

  • Silicone Strip n Stick Group- Gasket Tape- CS Hyde Co.

    CS Hyde is a supplier of Silicone Strip N Stick Tape also known as “silicone gasket tape”. These tapes have a carrier made from a closed-cell silicone sponge, fiberglass reinforced sponge, solid silicone, or low-density foam substrate. These gasket tapes are available with a silicone or acrylic adhesive backing protected by a peel-off liner. Strip-N-Stick® Tape offers superior service life, excellent conformability, flexibility and a service temperature ranging from -100°F to + 500°F (-73°C to + 260°C).  Other benefits include a low compression set and high adhesion to a variety of substrates. Strip n stick gaskets tapes can be used for high and low temperature resistance, enclosure or door gasketing, vibration dampening, and thermal insulation. Gasket tapes are unique because they can conform to irregular surfaces, wrap over or around cylinders, or be formed to produce right angles. Strip n stick tapes are a cost-effective solution for one application use or a gasket not requiring custom tooling or intricate parts.

    CS Hyde supplies strip n stick tape in widths ranging from .5”-2” wide in a variety of thicknesses and durometers. To learn more about the features of each gasket tape view options below. Order online- no minimum order quanity.




    .
    X

  • Silicone Strip n' Stick® Tape

    Strip n' Stick® Silicone Tape is made of Silicone Sponge, Foam, or Solid Silicone rubber with pressure sensitive adhesive for easy application. Compressible & flexible. Conforms to irregular surfaces, wrap over cylinders or be formed to produce right angles.
    Reduces costs of expensive die cut parts or bonding.
    Call [800-461-4161] or Email [sales@cshyde.com] for details

  • Self Fusing Silicone Tape- CS Hyde Co.

    Self-Fusing Silicone Tape is a high performance silicone self adhering wrapping tape. No adhesive is required. SSF Tape is self-adhering, self-fusing & permanent. Once wrapped, It fuses to itself in minutes; cures in 24 hours at room temperature. Faster curing and a harder finish is accomplished by applying heat after wrapping.

    All rolls are .020" Thick; Other colors & widths available.

    Certifications:

    • MIL-I-46852C, Type I & Type II

    • A-A-59163, Type I & Type II

    • MIL-I-22444C

    • Boeing DMS2186 Type 1 & Type 2

    • Lockheed Martin MMS J517

    • Lockheed Martin 5-00857

    • General Electric A50A493

    • General Electric A50E112

    • General Dynamics P5384

    • Rohr RMS315, Type I, II, III

    • FAR 25.853 & UL94 (upon request)