Your Worldwide Source for High Performance Tapes, Films, Fabrics & Silicone
Search:
Custom Conversion, Die-Cutting,
Laminating & Distribution of Sheet Materials
PPS (Polyphenylene Sulfide) Ryton QA200P® film is an impact-modified, unreinforced extrusion grade resin. PPS film offers desirable tensile elongation along with excellent flexibility and ductility.

PPS Film has high temperature resistance (up to 500F, 428F continuous), impact strength and flexibility. This new grade retains many of the traditional benefits of Fortron® PPS including excellent adhesion to nylons and polyolefins, high chemical resistance and low fuel permeation.

PPS offers the broadest resistance to chemicals of any advanced engineering plastic. It has no known solvents below 392°F (200°C) and is inert to steam, strong bases, fuels and acids. For example: .005" (5mil) film of Fortron PPS SKX-382 has a gasoline (CE10) permeability rate of 0.121 g mm/m2/day, which is far less than that of nylon, polyketone and other resins often used with gasoline and other fuels. Minimal moisture absorption and a very low coefficient of linear thermal expansion, combined with stress-relieving manufacturing, make PPS ideally suited for precise tolerance machined components.

PPS offers the broadest resistance to chemicals of any advanced engineering plastic. It has no known solvents below 392°F (200°C) and is inert to steam, strong bases, fuels and acids. For example: .005" (5mil) film of Fortron® PPS SKX-382 has a gasoline (CE10) permeability rate of 0.121 g mm/m2/day, which is far less than that of nylon, polyketone and other resins often used with gasoline and other fuels. Minimal moisture absorption and a very low coefficient of linear thermal expansion, combined with stress-relieving manufacturing, make PPS ideally suited for precise tolerance machined components.
© 2016 CS Hyde Company, All Rights ReservedTeflon® is a Registered Trademarks of E.I. du Pont de Nemours and Company used under license by CS Hyde Company. Rulon®, Strip-N-Stick are registered trademarks of Saint GoBain Performance Plastics Corporation, Solef® is a registered trademarks of Solvay Solexis C4-NGen® and PVDFStick are registered trade names of CS Hyde Company, Ultem® is a registered trademarks of GE Plastics Ultrason®E is a registered trademarks of BASF Corporation, TPX® is a registered trademark of Mitsui Chemicals, Inc. Halar® and Udel® are registered trademarks of Solvay Solexis, Inc, Mylar® is a registered trade name of DuPont Teijin Films
VELCRO® and ONE-WRAP® are registered trademarks of Velcro BVBA. Used with permission.