CS Hyde specialty film tapes are composed of polymer films that normally do not have an adhesive backing. Specialty film tapes are produced utilizing in house lamination and precise roll slitting equipment. Types of adhesives we commonly laminate to polymer films include acrylic, silicone, and other specialty 3M® adhesives like conductive adhesive for EMI/RFI shielding applications. We can produce a custom film tape that meets your thickness, adhesion, and width or length requirements. Contact Us or Submit a quote for more info.
(12)
If your design requires wear resistance, high flexural fatigue strength, good toughness and creep resistance, think of CS Hyde Company. We carry and custom cut Celcon® Acetal POM (Polyoxymethylene) to your exact specification. Celcon® Acetal copolymer offers high strength and rigidity over a broad temperature range, low wear, toughness and resistance to repeated impact. These products have superior dimensional stability, long-term creep resistance, long-term fatigue resistance and excellent resistance to moisture, chemicals and fuels (even oxygenated fuels and gasohol). Laminated with 3M pressure sensitive acrylic adhesive.
PEEK Tape is composed of two high performance materials: high temperature, chemical resistant, abrasion and wear resistant PEEK™ Film (002" to .010" thick) and 3M™ specialty adhesives (nominal adhesive thickness of .0015 to .002") in silicone adhesive (rated up to 500°F), acrylic adhesive (High tack-High Bond) or 5 mil. conductive filled acrylic adhesive (ideal for EMI/RFI shielding applications). Utilizing our in-house lamination services, we can produce PEEK ...
CS Hyde Company has custom laminating capabilities to put adhesive on Ultem® (PEI) films that normally do not have adhesive. Ultem® Tape is available in substate thickness of .003", .005", .010". All have 3M Acrylic Adhesive. Ultem® Tape can also be die-cut into custom shapes.
ULTEM® Substrate Film: Inherent Flame Resistance & UV Stability,Temperature up to 338F, VTM-0 UL94, Low dissipation factor, FDA Compliant, Ultem® offers high heat resistance coupled with high strength, stiffness, UV stability and broad chemical resistance. Combo of outstanding thermal, mechanical electrical properties together with exceptional flame resistance & thermoformability. Unprecedented performance-wide variety of ...
Mylar® film tape is constructed from DuPont Mylar® Type A polyester film laminated with an acrylic 300LSE high temperature 3M® adhesive. This polyester tape obtains Mylar® film performance properties including: balanced tensile properties, excellent resistance to moisture and most chemicals, as well as its temperature resistance rated (-100°F to 300ºF). Mylar tape with pressure sensitive acrylic adhesive is recommended for applications that require high initial tack and strong hold adhesion to low surface energy substrates like oily metals or some plastics. Mylar® tape with silicone adhesive can also be produced for ...
(9)
Nylon 6/6 Strips with Adhesive backing. Eliminates cost, time and work of mechanical fastening. Ease of assembly. Strips sold in widths of 4”, 6”, 12” in continuous footage up to 20 ft. Thickness: .031”, .060”, .125”. White or black. Available with permanent 3M VHB® adhesives. Custom shapes offered (washers, discs, squares.)
These Nylon 6/6 strips possess an outstanding balance of properties—combining strength, moderate stiffness, high service temperature and a high level of toughness. They are particularly resistant to repeated impact, have low coefficients of friction and excellent resistance to abrasion. They resist fuels, lubricants ...
(12)
Exclusively from CS Hyde comes PVDFstick®, PVDF film laminated with a strong acrylic adhesive for ease of application, positioning, and fastening. PVDFStick® offers excellent chemical and corrosion resistance, and features a high tensile strength (7,550psi@yield). It also has good thermal stability and can be used in sustained applications up to 300°F.
PVDF is extremely pure, which makes it a good candidate for food applications. When specified, PVDF resin complies with FDA regulation 21 CFR 177.510, USDA, 3A sanitary standards and meets ASTM D3222 resin specifications. PVDF can be used as a substitute for Tedlar®, ask for info.
Another feature of PVDFStick® Tape is its high impact resistance and ...
CS Hyde Company now offers two types of high-performance polycarbonate adhesive tapes with 3M pressure sensitive adhesive: type GG (gloss/gloss surface) and type VM (Velvet/Matte surface). Our polycarbonate tapes are composed of clear or translucent polycarbonate films, laminated in house with 3M™ high tack adhesive. We prefer 3M specialty adhesives because they exhibit high temperature performance, clarity, and excellent resistance to harsh environments and perform well in humidity as well as hot/cold cycles. Polycarbonate films have exceptional impact ...
An electrically conductive Kapton® tape composed of Kapton XC® polyimide film backed with high temperature 3M® 966 acrylic adhesive. Kapton® XC film surface is loaded with conductive carbons producing a polyimide film with tightly controlled surface resistivity. This film is known for its proven performance in numerous satellite applications providing both thermal and anti-static control. ...
A thermally conductive Kapton® tape composed of Kapton® MT Polyimide film backed with a high bond 3M™ 300LSE acrylic adhesive. Kapton® MT Film exhibits 3X the thermal conductivity and cut through strength of standard Kapton® HN film. This film is known for its excellent combination of electrical properties, thermal conductivity, and mechanical toughness ideal for electronic and automotive applications. 3M 300LSE is a universal adhesive that will bond to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints. For more specialized applications we can laminate an alternative adhesive to meet your application requirements like 3M™ 9882 which is a thermally ...
The ThermaCool™ family of high performance thermally conductive PSA tapes provide solutions to difficult thermal management problems. These products can be used in place of mechanical fasteners, provide excellent thermal coupling between components and heat sinks and can accommodate materials of different coefficients of thermal expansion with the compliant interface. All of the adhesives are flame retardant and are formulated for high performance adhesion while still being easily re-workable without damage to sensitive components.
Kapton® tape laminated with 3M 966 adhesive is a specialized film tape joining treated polyimide film with a long lasting 2 mil. high temperature acrylic adhesive system. This performance Kapton® tape incorporates the physical, mechanical, and electrical properties of Kapton® HN Film with a performance adhesive backing that features low outgassing properties ideal for aerospace, automotive, and electronics industries.
Currently available with 1 mil., 2 mil. and 3 mil. Kapton® Film Substrates,However CS Hyde can apply 3M 966 ...
(6)
With the ease of positioning and fastening in mind, CS Hyde Company laminates adhesive to Delrin® sheet.
Delrin® materials are based on formaldehyde polymerization, are highly crystalline, strong, rigid, and possess good moisture, temperature, and solvent resistance. Because Delrin® absorbs far less moisture than type 6 and type 6/6 nylons, it is widely used for many mechanical and industrial applications requiring closer tolerances and greater dimensional stability.
Delrin® Sheet has a 3M acrylic pressure sensitive adhesive with a Peel-Off Liner. For more specific adhesive properties, please request the adhesive data sheet.
(3)
Product K5-05 is manufactured from extra strength para-aramid fiber cloth impregnated with a dispersion of anti-static PTFE. This tape has a high temperature, Pressure Sensitive Silicone Adhesive. This anti-static ptfe tape is black in color and provides protection from UV damage.
(33)
"FAT" PTFE made with Teflon™ fluoroplastic Tape is a thick gauge skived PTFE tape with pressure sensitive acrylic adhesive. This PTFE tape is unique in the aspect that it is manufactured at thicknesses well above standard product offerings. This material is available .020" thk. to .125" thk. in roll goods, sheet goods or die cut parts.
This PTFE tape is specifically designed for applications where thin PTFE tapes are not enough. FAT PTFE has the heft, density and mass that make it very desirable for applications where thicker materials are a must. FAT PTFE Tape has all the other excellent characteristics associated with standard PTFE tapes: superior insulating strength, slick ...
(8)
Rulon® Tape is manufactured from skived compounded PTFE Rulon® film material. The RU-Series is often referred to as bearing tape becuase its film surface is self-lubricating and its backing is conformable. Rulon combines a low coefficient of friction with high temperature stability. It also offers outstanding abrasion resistance, which equates to a 500-fold increase in wear resistance over PTFE in rotating bearing tests. The Rulon backing is chemically inert and offers excellent high temperature resistance. This tape construction is stable, non-toxic and weather resistant.
Both Rulon® tapes have an 8.0 mil. substrate thickness and 2.0 mil. of pressure sensitive adhesive for ...
Rulon®, Strip-N-Stick are registered trademarks of Saint
GoBain Performance Plastics Corporation, Solef® is a registered trademarks of
Solvay Solexis
C4-NGen® and PVDFStick are registered trade names of
CS Hyde Company,
Ultem® is a registered trademarks of GE Plastics
Ultrason®E is a registered trademarks of BASF
Corporation, TPX® is a registered trademark of
Mitsui Chemicals, Inc.
Halar® and Udel® are registered trademarks of
Solvay Solexis, Inc, Mylar® is a registered trade
name of DuPont
Teijin Films
CS Hyde specialty film tapes are composed of polymer films that normally do not have an adhesive backing. Specialty film tapes are produced utilizing in house lamination and precise roll slitting equipment. Types of adhesives we commonly laminate to polymer films include acrylic, silicone, and other specialty 3M® adhesives like conductive adhesive for EMI/RFI shielding applications. We can produce a custom film tape that meets your thickness, adhesion, and width or length requirements. 
An electrically conductive Kapton® tape composed of 
