(17)
CS Hyde’s impact absorbing ABS (Acrylonitrile Butadiene Styrene) film is made from Cycolac resin and features a temperature range of 40F to 140F continuous, a tensile strength of 5700PSI, Rockwell R100 hardness rating, and a light translucent beige color.
This glossy film sheet is commonly used in medical devices, housewares, automobiles, and business equipment. It is chemical and impact resistant plus it offers toughness and rigidity. Unless otherwise noted, we sell this film by the continuous lineal foot. Custom sized sheeting available.
(10)
Halar ® ECTFE (Ethylene-chlorotrifluoroethylene) Film provides excellent purity, chemical resistance, good electrical properties, a broad-use temperature range from cryogenic to 300°F (150°C), and meets the requirements of UL-94 V-0 vertical flame test in thicknesses as low as 7 mils (0.18 mm). It is a tough material with excellent impact strength and wear resistance. Halar® 300 resin. Custom sized sheeting available.
(7)
Tefzel® Optically Clear Film is an extremely durable, thin polymeric film closely related to PTFE fluorocarbon resin. Of all the PTFE fluoropolymer family, Tefzel® (ETFE) is the most tough/ durable. Flexible and nearly 100 percent transparent, Tefzel® Optically Clear Film has excellent mechanical strength and reliability against cracking and abrasion. In outdoor applications, Tefzel® shows very little degradation over a long period of time despite constant UV radiation exposure, making it a suitable long term substitute for glass. Tefzel® Optically Clear Film features easy processibility and high-energy radiation resistance.
Film types are:Type LZ--General-purpose film, Type CLZ--Treated one-side for ...
CS Hyde Company supplies three types of high performance polycarbonate film; Clear Polycarbonate-type GG (gloss/gloss surface), Clear Hard Coated Polycarbonate- Type HC, and Translucent Hazy Polycarbonate- type VM (Velvet/Matte surface). Polycarbonate films have exceptional impact strength, weatherability and thermoformability. Our clear polycarbonate film is idea for optical clarity applications that also require high impact strength properties. Velvet/Matte polycarbonate is also available that is translucent in color and can be used for privacy applications while maintaining high impact strength. Common plastics associated with polycarbonate include Acrylic, Mylar®, Polyester, and PETG. In comparison, Polycarbonate has a ...
(24)
PEEK™ film has extremely high temperature resistance combined with excellent mechanical, electrical, and chemical resistance making it a high performance semi-crystalline thermoplastic suitable for use in a wide variety of demanding applications. Mechanically, this film is capable of a high tensile strength of 18.9 kpsi (130 MPa), a flexural strength of 23.6kpsi (163 MPa) and a Rockwell hardness of 99 (R Scale).
PEEK™ film is capable of maintaining its properties up to very high temperatures (continuous use of -70 to 500F), is UL RTI rated up to 464F, and has a melting point of 644F. PEEK™ also boasts a heat deflection temperature (1.8MPa) of 306F. 0.012-0.280mm thickness carries an HB ...
(27)
Ultem®/PEI (polyetherimide) film offers high heat resistance, coupled with high mechanical strength, stiffness, UV stability, and broad chemical resistance. This combination of properties proves the ability of this film to be used for a wide variety of demanding new design concepts. Similar to PEEK, Ultem® can be considered a more cost effective solution if continuous temperatures below 338F are acceptable per the application. It has a UL94 flame resistance rating of VTM-0, is FDA compliant, and is thermoformable. Custom sized sheeting available.
Kapton® Type HN film is a tough, aromatic polyimide film, exhibiting an excellent balance of physical, chemical, and electrical properties over a wide temperature range. Kapton® has been successfully used in applications at temperatures as low as -452°F (-269°C) and as high as 752°F (400°C).
Chemically, its polyimide polymer makeup is the result of a polycondensation reaction between pyromellitic dianhydride and 4,4.diaminodiphenyl ether. Kapton does not melt or burn and has excellent chemical resistance; there are no know organic solvents for the film. Kapton® HN film meets ASTM D-5213 (type 1, ...
TPX® (Polymethylpentene, or PMP) has remarkable combination of transparency and resistance to heat/chemicals. Some of its distinguishing characteristics include its low moisture absorption, exceptional electrical and acoustical properties, good chemical resistance, high heat resistance, and transparency.
3 mil. and 5 mil. TPX® has a gloss/matte surface 10 mil. TPX® Film has a Gloss (polish)/matte surface (*limited availability matte/matte) specify when ordering to confirm availability 20 mil. TPX® has a matte/matte surface
TPX resin is FDA compliant, and has the lowest specific gravity of any known thermoplastic. It is thermoformable at temps of ...
(6)
PSU Udel is a tough, rigid, high-strength, amorphous thermoplastic that maintains its properties over a wide temperature range. It has good electrical properties, clarity and toughness, plus exceptional steam resistance and thermoformability. It is used widely in food service, electronics, medical devices, chemical process equipment and automotive industries. Base UDEL® P-1700 resin. Resin is FDA compliant.
Rulon®, Strip-N-Stick are registered trademarks of Saint
GoBain Performance Plastics Corporation, Solef® is a registered trademarks of
Solvay Solexis
C4-NGen® and PVDFStick are registered trade names of
CS Hyde Company,
Ultem® is a registered trademarks of GE Plastics
Ultrason®E is a registered trademarks of BASF
Corporation, TPX® is a registered trademark of
Mitsui Chemicals, Inc.
Halar® and Udel® are registered trademarks of
Solvay Solexis, Inc, Mylar® is a registered trade
name of DuPont
Teijin Films
