- All Categories
- Adhesive Tapes
- PTFE Tapes made with Teflon™ fluoropolymers
- UHMW Polyethylene Tape
- Kapton® (Polyimide) Tape
- Teflon™ PTFE Coated Fiberglass Tapes
- Silicone Strip n Stick® Tape- Gasket Tape
- Fiberglass Tape (Woven Glass Cloth Tape)
- Thermal & Plasma Flame Spray Masking Tape
- Specialty Film Tapes
- Clear/Transparent Adhesive Tapes
- 3M™ Adhesive Transfer Tapes- Rolls & Sheets
- 3M™ VHB Tape- 4941/4905- Rolls & Sheets
- Foil Tapes & (AFD) Foil Tape Discs
- Double Sided Adhesive Tapes
- Delrin® Tape with Adhesive
- FEP Optically Clear Tape made with Teflon™ fluoropolymers
- Rulon® Tape with Adhesive (bearing tape)
- FST Tape made with Teflon™ fluoropolymers
- Kevlar® / Aramid Fiber Tape with PSA Adhesive
- Metalized Polyester Tape
- Polyurethane Foam Tape- High Density Foam
- Mylar® Film Tape with Adhesive
- Optically Clear Polyester Tape with Adhesive
- Polycarbonate Film Tape with Adhesive
- Polyester (PET) Tape with Silicone Adhesive
- Self Fusing Silicone Tape
- Vinyl Tape
- Silicone Strip n' Stick® Tape
- Utility Grade Cloth Duct Tape
- Adhesive Remover
- Electrical Tape
- High Performance Polymer Films
- ABS Film
- Acetal (Polyoxymethylene) POM Film
- Delrin® Film
- Anti-Static UHMW Film (BLACK)
- 3M™ ESR Reflector Film
- FEP & PFA Optically Clear Film made with Teflon™ fluoropolymers
- HALAR® ECTFE Film
- HDPE Polyethylene Film (High Strength)
- Hytrel® (TPE) Film
- Aluminum Polyimide Film
- Thick Polyimide Film
- Cirlex® Kapton® Film
- Kapton® (Polyimide) Film - Type FN
- Kapton® (Polyimide) Film - Type HN
- Kapton® (Polyimide) Film - Type XC
- Kapton® (Polyimide) Film - Type MT
- Kapton (Polyimide) Film- Type FPC
- Mylar® Polyester (PET Film)
- Optically Clear PETG Film
- Optically Clear Polyester Film Rolls
- Metalized Polyester PET film
- Nylon 6/6 Film
- PEEK™ Film
- ULTEM® PEI (Polyetherimide Resin) Film
- PES ULTRASON (Polyethersulfone Resin) Film
- Polycarbonate Film- Clear & Velvet Matte
- Polypropylene (PP) Film
- PPS Film (Polyphenylene sulfide)
- PSU / UDEL® Film (Polysulfone Resin) FDA Compliant, Transparent
- PVDF / KYNAR® (Polyvinylidene Fluoride Resin) Film
- PTFE Film made with made with Teflon™ fluoropolymers
- Tefzel® (ETFE) Optically Clear Film (General Purpose Grade)
- TPX® Polymethylpentene Film
- UHMW Polyethylene Film
- Teflon™ PTFE Coated Fabrics & Non-Coated Fabrics
- Standard Grade- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers (42)
- Ultra Premium Grade- PTFE Coated Glass Fabric made with made with Teflon™ fluoropolymers
- Mechanical Grade- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Tear & Crease Resistant- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Kevlar® Fabric
- Black Anti-Static PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Tef-Lam Fiberglass PTFE Laminate Fabric
- Controlled Porosity PTFE Fabric
- Silicone Coated Fiberglass Fabric
- Silicone Coated 1 Side / Wash Coat Fabric
- 2 Ply Textured Silicone Coated Fiberglass Fabric
- 3 Ply Textured Silicone Coated Fiberglass Fabric
- Kevlar® Aramid Fabric
- Semi Porous Fiberglass Fabric made with Teflon™ fluoropolymers
- Porous PTFE Mesh Belting
- Kevlar® fabric Coated with PTFE
- Silicone Rubber Sheeting
- Commercial Grade Solid Silicone Rubber Sheet
- FDA Approved Solid Silicone Rubber Sheet
- Translucent Solid Silicone Rubber Sheet
- Medical Grade Solid Silicone Rubber Sheet
- Specification Grade Solid Silicone Rubber Sheet
- Fiberglass Reinforced Solid Silicone Rubber Sheet
- Flame Retardant Solid Silicone Rubber Sheet
- Solid Silicone (Fluorosilicone) Rubber Sheet
- Electrically Conductive Solid Silicone Rubber Sheet
- High Temperature Solid Silicone Rubber Sheet
- High Strength Solid Silicone Rubber Sheet
- Thermally Conductive Solid Silicone Rubber Sheet
- Flame Retardant Silicone Foam
- Commercial Grade Silicone Sponge Rubber Sheet
- Flame Retardant Silicone Sponge Rubber Sheet
- Fiberglass Reinforced Silicone Sponge Rubber Sheet
- Low Compression Set Silicone Sponge Rubber Sheet
- Thermally Conductive Silicone Sponge Rubber Sheet
- Silicone Coated Fiberglass Fabric
- Silicone Coated 1 Side / Wash Coat Fabric
- 2 Ply Textured Silicone Coated Fiberglass Fabric
- 3 Ply Textured Silicone Coated Fiberglass Fabric
- Silicone Strip n Stick® Tape- Gasket Tape
- Silicone Strip n' Stick® Tape
- Self Fusing Silicone Tape
- Silicone Strip n Stick® Tape- Gasket Tape
- Strip-N-Stick medium density silicone sponge w/ silicone adhesive- 7-100S
- Strip-N-Stick medium density silicone sponge w/ acrylic adhesive- 7-200A
- Strip-N-Stick fiberglass reinforced sponge w/ acrylic adhesive- 7-300AR
- Strip-N-Stick solid silicone rubber 30 duro w/ acrylic adhesive- 7-440A
- Strip-N-Stick solid silicone rubber 30 duro w/ silicone adhesive- 7-440S
- Strip-N-Stick grey flame resistant silicone foam w/ acrylic adhesive- 7-512AF
- 3M™ Adhesive Products
- Threads, Cords, Kevlar, VELCRO®
- PTFE Belting
- Porous PTFE Mesh Belting
- Standard Grade Fiberglass Tape made with Teflon™ fluoroplastic
- Anti-Static fabric made with Teflon™ fluoroplastic
- Semi Porous Fiberglass Fabric made with Teflon™ fluoropolymers
- Silicone Coated Fiberglass Fabric
- Ultra Premium Fiberglass Fabric made with Teflon™ fluoroplastic
- Kevlar® Premium Grade Fabric Coated with PTFE
- Tef-Lam Fiberglass Fabric Laminated with PTFE
- Teflon™ PTFE fluoropolymer Products
- Teflon™ PTFE Sheets, Rods and Rectangles
- 3D Printing Materials
- Application Specific
- Clear Plastic Films for Face Shields, Sneeze Guards, Sanitary Barriers
- Abrasion/Impact Resistance
- Chemical Resistance
- Dielectric Strength
- Flame Resistance
- FDA Approved Substrates
- Medical Grade Products
- Low Friction Heat Sealer Tapes
- Clear-Transparent: Plastic Products
- 3D Printing Materials
- Stock Plastic Film & Tape Sheets
- Stock Die-Cut Parts- Dots, Squares, Washers
- Thermal & Plasma Flame Spray Masking Tape
- C4-NGEN® Mousepads & Gear
- Other Applications
- More Products
- PTFE Beading (Cord), small diameter
- PTFE Lacing Tape (Flat Braid)
- PTFE Tie Cord (Round Braid)
- PTFE Thread Seal Tape
- Kevlar® Thread
- Nylon Thread (Bonded)
- Polyester Anti-Static Conductive Thread
- Polyester Thread (Bonded)
- PTFE Coated Fiberglass Thread
- PTFE coated Quartz Thread
- Polycarbonate (Machine Grade)
- 56-HKIT
- 56-HS-9
- Tacking Iron Models
- Sale Specials
- Stock Die-Cut Parts- Dots, Squares, Washers
- Converting & Sheeting
- Adhesive Tapes
FEP & PFA Optically Clear Film made with Teflon™ fluoropolymers
(34)DuPont® Teflon™ FEP (Type A) & PFA (Type LP) are optically clear Teflon™ films that benefit from the ability to be thermoformed, heat-sealed, plastic-welded or bonded. PFA film is very similar to FEP Film, except it has a higher melting point of (302C to 310C vs. FEP’s melt range of 260C to 280C). PFA Film is recommended over FEP Film for applications that require superior creep resistance at high temperatures, low-temperature toughness, and a higher flame resistance. Teflon™ PTFE fluoropolymers are the most inert of all plastics and complie with USFDA regulations for food contact applications. FEP and PFA films possess superior anti-stick, low friction properties, strength and puncture resistance, chemical & solvent resistance, as well as high dielectric strength (over 7000 volts per mil for 1 mil). No electrical tracking, non-wettable (hydrophobic), non-flammable, non-charring and long term weatherabilliy. CS Hyde FEP & PFA films offer superior reliability & retention of properties over large areas. FEP film meets the requirements of ASTM D-3368.
FEP & PFA Applications:
- Chemical resistant liners (tanks & diaphragms)
- Optics lenses
- Release liners (DLP & SLA 3D Printer VAT Systems)
- Solar Receptors
FEP Film & PFA Film is available in rolls, sheets, or custom width rolls. CS Hyde also has in house capabilities to laminate adhesive to FEP & PFA Film.
Teflon™ Fluoroplastic is a trademark of The Chemours Company FC, LLC used under license by CS Hyde Company.
PTFE Film made with Teflon™ fluoropolymers
(39)CS Hyde Company stocks skived PTFE (Polytetrafluoroethylene) film in a huge range of thicknesses, starting at .5 mil (.0005") and going up to 125mil (.125”). We sell this high performance PTFE film by the sheet, lineal foot, continuous footage, slit width (rolls), die cut (custom AND standard shapes), and/or laminated with a variety of adhesive options. PTFE is inherently super slippery and extremely temperature/chemical resistant, making it a highly suitable material to be used as a release sheet. For product information, samples, pricing, etc. please email- sales@cshyde.com
Examples of electrical applications: capacitor films, harnesses for electrical wiring in automotive and aerospace applications, spacers for transformers and other electrical insulation applications where high dielectric strength and high temperature resistance are requisite. Virgin Grade, General Purpose - No Adhesive / White Color. Also available as PTFE Tape in multiple thicknesses, grades, and adhesives
TYPICAL PTFE FILM PROPERTIES
|
15-2F |
15-3F |
15-5F |
15-10F |
15-15F |
15-20F |
Backing Material |
Virgin PTFE Film |
|||||
Thickness |
.002” |
.003” |
.005” |
.010” |
.015” |
.020” |
Sheet Stock (width) |
12” to 48” |
|||||
Roll Stock (width) |
¼”to 48” |
|||||
Length |
custom |
|||||
Specification Sheet |
AMS 3652 / ASTM D 3308 |
|||||
Tensile Strength |
>1500 psi |
|||||
Elongation at Break |
200% +/- |
|||||
Dielectric Strength (i.e. – Breakdown voltage) |
500 volts per mil |
For PTFE Thicknesses 30 mil through 125 mil. See properties data sheet in downloads tab
Tefzel® (ETFE) Optically Clear Film (General Purpose Grade)
(7) Tefzel® Optically Clear Film is an extremely durable, thin polymeric film closely related to PTFE fluorocarbon resin. Of all the PTFE fluoropolymer family, Tefzel® (ETFE) is the most tough/ durable. Flexible and nearly 100 percent transparent, Tefzel® Optically Clear Film has excellent mechanical strength and reliability against cracking and abrasion. In outdoor applications, Tefzel® shows very little degradation over a long period of time despite constant UV radiation exposure, making it a suitable long term substitute for glass. Tefzel® Optically Clear Film features easy processibility and high-energy radiation resistance.Film types are:Type LZ--General-purpose film, Type CLZ--Treated one-side for improved cementability, and Type CLZ-20--Treated both sides for improved cementability. Tefzel® films can be thermoformed, laminated, heat-sealed, die-stamped, and oriented for use in many applications including high flex lightweight wiring insulation, composite part mold release, anti-corrosive valve linings, non-stick roll covers, rupture disks, high frequency microwave circuitry, pharmaceutical cap liners, sterile packaging, cable insulation, microphone electret membranes, photovoltaic cell glazing, anti-graffiti coverings, erasable surface coverings, automotive airbag systems, fuel hose permeation barrier, hot melt adhesive and thousands more possible applications. /Asset/Tefzel ETFE Optically Clear Film Group_1.jpg
Etched PTFE Film made with Teflon™ fluoropolymers
(3)Etched PTFE Film available in a variety of thickness and etched on one or two sides. Chemical etching enhances adhesion and makes PTFE film bondable utilizing a variety of different types of transfer adhesive, epoxy, or liquid adhesives without diminishing PTFE’s performance properties.
Renowned for its non-stick properties, PTFE film ensures effortless release, making it ideal for applications where friction reduction and non-stick properties are paramount. Although its non-stick properties can be ideal, it can also make it extremely hard to bond to itself or another substrate. CS Hyde specializes in PTFE adhesive lamination and can apply a variety of adhesives to various PTFE film thickness. Adhesive backed PTFE can be supplied in rolls, sheets, or die cut parts.
The types of adhesives we apply include Acrylic, High Bond Acrylic, and Silicone.
Whether it's in food processing, industrial machinery, or aerospace technology, etched PTFE film exhibits superior application properties bondable to your application.
Common Questions:
Does etching alter the properties of PTFE?
Etching consists of altering the chemical composition of the fluoropolymer and not necessarily the material itself. Etching only affects a depth of a few angstroms or (one ten millionth of a millimeter) in correlation to the thickness of the PTFE and does affect its physical properties throughout the entirety of the film.
Appearance of Etched PTFE?
In comparison to natural skived PTFE the non-treated side will a blue/gray color instead of pure white in correlation to our skived PTFE. The etched side will have a light tan to dark brown coloration like a wood grain finish. This may look streaky or blotchy in appearance. This coloration can alter from one lot to another and can be visually lighter or darker depending on thickness of the PTFE.
Etched PTFE Availability?
We manufacture specialty film tapes derived from etched PTFE, so we commonly have etched material in stock. If you’re looking for a large roll length, custom width, or a specific etched film thickness, please submit an RFQ and we can quote the most accurate lead time for delivery. For online orders the standard lead time is 2-3 business days.
/Asset/etchedptfefilm-cshyde.jpg