An extremely high temperature resistance combined with excellent mechanical, electrical, and chemical resistance makes PEEK™ (Polyetheretherketone) a high performance semi-crystalline thermoplastic suitable for use in a wide variety of demanding applications.

While maintaining similar dielectric properties, this film features higher tear and chemical resistance than Kapton® Polyimide HN, FN, and CR films, as well as better barrier performance against oxygen and water vapor, lower moisture absorption, and superior resistance to hydrolysis. This makes PEEK™ film well suited to hot, humid environments.

Mechanically, this film is capable of a high tensile strength of 18.9 kpsi (130 MPa), a flexural strength of 23.6kpsi (163 MPa) and a Rockwell hardness of 99 (R Scale).

PEEK™ is capable of maintaining its properties up to very high temperatures (continuous use of -70 to 500F), is UL RTI rated up to 464F, and has a melting point of 644F. PEEK™ also boasts a heat deflection temperature (1.8MPa) of 306F. 0.012-0.280mm thickness carries an HB flammability rating, while 0.50-0.75mm has a V-1 rating.

PEEK™ meets many aerospace, automotive, fire, smoke and toxicity, food/water, medical/pharmaceutical, and military approvals and standards. Custom sized sheeting available. PEEK™ is available with adhesive as well, exclusively from CS Hyde Company as PEEK Tape.

Comply with the compositional requirements of the Code of Federal regulations FDA 21 CFR 177.2415 of the Food and Drug Administration (FDA) of the United States of America.