- All Categories
- Adhesive Tapes
- PTFE Tapes made with Teflon™ fluoropolymers
- UHMW Polyethylene Tape
- Kapton® (Polyimide) Tape
- Teflon™ PTFE Coated Fiberglass Tapes
- Silicone Strip n Stick® Tape- Gasket Tape
- Fiberglass Tape (Woven Glass Cloth Tape)
- Thermal & Plasma Flame Spray Masking Tape
- Specialty Film Tapes
- Clear/Transparent Adhesive Tapes
- 3M™ Adhesive Transfer Tapes- Rolls & Sheets
- 3M™ VHB Tape- 4941/4905- Rolls & Sheets
- Foil Tapes & (AFD) Foil Tape Discs
- Double Sided Adhesive Tapes
- Delrin® Tape with Adhesive
- FEP Optically Clear Tape made with Teflon™ fluoropolymers
- Rulon® Tape with Adhesive (bearing tape)
- FST Tape made with Teflon™ fluoropolymers
- Kevlar® / Aramid Fiber Tape with PSA Adhesive
- Metalized Polyester Tape
- Polyurethane Foam Tape- High Density Foam
- Mylar® Film Tape with Adhesive
- Optically Clear Polyester Tape with Adhesive
- Polycarbonate Film Tape with Adhesive
- Polyester (PET) Tape with Silicone Adhesive
- Self Fusing Silicone Tape
- Vinyl Tape
- Silicone Strip n' Stick® Tape
- Utility Grade Cloth Duct Tape
- Adhesive Remover
- Electrical Tape
- High Performance Polymer Films
- ABS Film
- Acetal (Polyoxymethylene) POM Film
- Delrin® Film
- Anti-Static UHMW Film (BLACK)
- 3M™ ESR Reflector Film
- FEP & PFA Optically Clear Film made with Teflon™ fluoropolymers
- HALAR® ECTFE Film
- HDPE Polyethylene Film (High Strength)
- Hytrel® (TPE) Film
- Aluminum Polyimide Film
- Thick Polyimide Film
- Cirlex® Kapton® Film
- Kapton® (Polyimide) Film - Type FN
- Kapton® (Polyimide) Film - Type HN
- Kapton® (Polyimide) Film - Type XC
- Kapton® (Polyimide) Film - Type MT
- Kapton (Polyimide) Film- Type FPC
- Mylar® Polyester (PET Film)
- Optically Clear PETG Film
- Optically Clear Polyester Film Rolls
- Metalized Polyester PET film
- Nylon 6/6 Film
- PEEK™ Film
- ULTEM® PEI (Polyetherimide Resin) Film
- PES ULTRASON (Polyethersulfone Resin) Film
- Polycarbonate Film- Clear & Velvet Matte
- Polypropylene (PP) Film
- PPS Film (Polyphenylene sulfide)
- PSU / UDEL® Film (Polysulfone Resin) FDA Compliant, Transparent
- PVDF / KYNAR® (Polyvinylidene Fluoride Resin) Film
- PTFE Film made with made with Teflon™ fluoropolymers
- Tefzel® (ETFE) Optically Clear Film (General Purpose Grade)
- TPX® Polymethylpentene Film
- UHMW Polyethylene Film
- Teflon™ PTFE Coated Fabrics & Non-Coated Fabrics
- Standard Grade- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers (42)
- Ultra Premium Grade- PTFE Coated Glass Fabric made with made with Teflon™ fluoropolymers
- Mechanical Grade- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Tear & Crease Resistant- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Kevlar® Fabric
- Black Anti-Static PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Tef-Lam Fiberglass PTFE Laminate Fabric
- Controlled Porosity PTFE Fabric
- Silicone Coated Fiberglass Fabric
- Silicone Coated 1 Side / Wash Coat Fabric
- 2 Ply Textured Silicone Coated Fiberglass Fabric
- 3 Ply Textured Silicone Coated Fiberglass Fabric
- Kevlar® Aramid Fabric
- Semi Porous Fiberglass Fabric made with Teflon™ fluoropolymers
- Porous PTFE Mesh Belting
- Kevlar® fabric Coated with PTFE
- Silicone Rubber Sheeting
- Commercial Grade Solid Silicone Rubber Sheet
- FDA Approved Solid Silicone Rubber Sheet
- Translucent Solid Silicone Rubber Sheet
- Medical Grade Solid Silicone Rubber Sheet
- Specification Grade Solid Silicone Rubber Sheet
- Fiberglass Reinforced Solid Silicone Rubber Sheet
- Flame Retardant Solid Silicone Rubber Sheet
- Solid Silicone (Fluorosilicone) Rubber Sheet
- Electrically Conductive Solid Silicone Rubber Sheet
- High Temperature Solid Silicone Rubber Sheet
- High Strength Solid Silicone Rubber Sheet
- Thermally Conductive Solid Silicone Rubber Sheet
- Flame Retardant Silicone Foam
- Commercial Grade Silicone Sponge Rubber Sheet
- Flame Retardant Silicone Sponge Rubber Sheet
- Fiberglass Reinforced Silicone Sponge Rubber Sheet
- Low Compression Set Silicone Sponge Rubber Sheet
- Thermally Conductive Silicone Sponge Rubber Sheet
- Silicone Coated Fiberglass Fabric
- Silicone Coated 1 Side / Wash Coat Fabric
- 2 Ply Textured Silicone Coated Fiberglass Fabric
- 3 Ply Textured Silicone Coated Fiberglass Fabric
- Silicone Strip n Stick® Tape- Gasket Tape
- Silicone Strip n' Stick® Tape
- Self Fusing Silicone Tape
- Silicone Strip n Stick® Tape- Gasket Tape
- Strip-N-Stick medium density silicone sponge w/ silicone adhesive- 7-100S
- Strip-N-Stick medium density silicone sponge w/ acrylic adhesive- 7-200A
- Strip-N-Stick fiberglass reinforced sponge w/ acrylic adhesive- 7-300AR
- Strip-N-Stick solid silicone rubber 30 duro w/ acrylic adhesive- 7-440A
- Strip-N-Stick solid silicone rubber 30 duro w/ silicone adhesive- 7-440S
- Strip-N-Stick grey flame resistant silicone foam w/ acrylic adhesive- 7-512AF
- 3M™ Adhesive Products
- Threads, Cords, Kevlar, VELCRO®
- PTFE Belting
- Porous PTFE Mesh Belting
- Standard Grade Fiberglass Tape made with Teflon™ fluoroplastic
- Anti-Static fabric made with Teflon™ fluoroplastic
- Semi Porous Fiberglass Fabric made with Teflon™ fluoropolymers
- Silicone Coated Fiberglass Fabric
- Ultra Premium Fiberglass Fabric made with Teflon™ fluoroplastic
- Kevlar® Premium Grade Fabric Coated with PTFE
- Tef-Lam Fiberglass Fabric Laminated with PTFE
- Teflon™ PTFE fluoropolymer Products
- Teflon™ PTFE Sheets, Rods and Rectangles
- 3D Printing Materials
- Application Specific
- Clear Plastic Films for Face Shields, Sneeze Guards, Sanitary Barriers
- Abrasion/Impact Resistance
- Chemical Resistance
- Dielectric Strength
- Flame Resistance
- FDA Approved Substrates
- Medical Grade Products
- Low Friction Heat Sealer Tapes
- Clear-Transparent: Plastic Products
- 3D Printing Materials
- Stock Plastic Film & Tape Sheets
- Stock Die-Cut Parts- Dots, Squares, Washers
- Thermal & Plasma Flame Spray Masking Tape
- C4-NGEN® Mousepads & Gear
- Other Applications
- More Products
- PTFE Beading (Cord), small diameter
- PTFE Lacing Tape (Flat Braid)
- PTFE Tie Cord (Round Braid)
- PTFE Thread Seal Tape
- Kevlar® Thread
- Nylon Thread (Bonded)
- Polyester Anti-Static Conductive Thread
- Polyester Thread (Bonded)
- PTFE Coated Fiberglass Thread
- PTFE coated Quartz Thread
- Polycarbonate (Machine Grade)
- 56-HKIT
- 56-HS-9
- Tacking Iron Models
- Sale Specials
- Stock Die-Cut Parts- Dots, Squares, Washers
- Converting & Sheeting
- Adhesive Tapes
Ultem® PEI Tape Sheets- 3D Printing Surface
About Ultem® PEI & 3D Printing:
Ultem®/PEI (polyetherimide) has struck the 3D printing world as a high performance building surface/platform for 3D printing beds. Ultem®/PEI offers extreme heat resistance, coupled with high mechanical strength, stiffness, UV stability, and broad chemical resistance. This combination of properties allows this film to be utilized in a wide variety of demanding new design concepts including aerospace, automotive, and even medical applications. PEI is a functional product for 3D printing due to its extremely smooth finish, high temperature resistance, and ability to provide print placement security while releasing prints smoothly. Ultem®/PEI is ideal for ABS and PLA filament however it also can be used with other filament types. For easy installation, our sheets are backed with high temp 3M™ Acrylic Adhesive- Easy remove liner. Peel, place and begin printing (no self laminating required). Ultem/PEI is a “no surface prep” material which allows for no major surface modifications like applying special solutions or tapes before each print. CS Hyde PEI sheets are Ultem® 1000 grade, Ultem® is a registered trademark of GE Plastics. Used with Permission.
Adhesive Temperature:
Short term (minutes/hours)- 400°F (204°C)
Long term (days/weeks)- 300°F (149°C)
Please Note:
(conversions from thousands to inch.)
3 mil. = .003"
5 mil. = .005"
10 mil. = .01"
20 mil. = .02"
30 mil. = .03"
40 mil. - .04"
*NOTE: Adhesive can be applied to either (Matte) side or (Gloss) side of Ultem® Film.
(Standard method: Adhesive is applied to the Matte side of the film, unless customer advises otherwise).
*International Customers: SHIPPING CALCULATOR COSTS MAY VARY! Email: Resources@cshyde.com with zip code for a shipping estimate
/Asset/3dprinting.jpg
3D Printing: FEP Film or Tape Release Sheets
(6)FEP Film or FEP Tape consists of optically clear Teflon™ film made with Teflon® fluoropolymers. FEP is used in Stereolithography (SLA), a special form of 3D Printing that works by focusing an ultraviolet (UV) laser onto a vat of photopolymer resin. FEP works well in this style of printing due to its excellent transmission of UV rays, low gas and vapor permeability as well as anti-stick and low friction properties. Other key properties include optical clarity, smooth finish, hydrophobic, superior dimensional stability, immense chemical resistance, excellent electrical properties, and high service temperatures of up to 400°F (200°C). FEP is constructed with silicone adhesive (-100°F to 400°F), which allows for greater adhesion, easy application, and clean removal. FEP without adhesive is also available for welding, heat sealing, and splicing film applications (See Films, FEP).
CS Hyde FEP tape or film can be applied to the resin vat of most DLP, SLA, LCD 3d Printers. FEP tape is backed with silicone adhesive which resists oxygen, ozone, and UV light. Although silicone is the standard adhesive for FEP, acrylic is available upon request. Adhesives help fuse the FEP to the vat, creating a seal between both the print surface and the vat. CS Hyde FEP Tape is available in sheets with peel off liner or in self wound rolls cut to your specifications. Sheets however make the FEP easier to apply. Standard FEP tape is available in .002” film with .0015” silicone adhesive- total .0035” and widths- 1/8”-13”. Other thicknesses are available. FEP film is available in thicknesses .0005” up to .020” sold by the lineal foot, sheet or roll.
*CS Hyde Company has capabilities to cut FEP film to any specification, including specific 3D print bed requirements.
*CS Hyde Company can apply a variety of 3M adhesives customized to specific film size.
3D Printing: Kapton® Tape Sheets
(6)Since the 1960’s Kapton® has been a high performance material for applications in industries such as aircraft, spacecraft, and x-ray technology. Today Kapton® has transitioned into 3D Printing. The 3D printing world has found Kapton® to be a functional print surface for most 3D Printers. The most common filaments printed on Kapton® ® Tape include thermoplastic polymers such as ABS (Acrylonitrile butadiene styrene) and PLA (Polylactic Acid). A recurring problem with printing ABS filaments on non-Kapton® surfaces is that parts tend to shrink while they are cooled. Kapton® tapes hold prints firmly in place and retain heat to prevent filaments from cooling too fast. Allowing the filaments to be cooled at a steady pace enables the prints to be easily removed from the surface. Other Kapton® properties include superior dielectric strength, high temperature and chemical resistance; tear, puncture, and abrasion resistance- all qualities suited for a printing surface.
Kapton® is available with a pressure sensitive adhesive system on one or both sides. Single sided Kapton® tape w/ silicone adhesive is the most commonly purchased. Kapton® Tape is available in thicknesses: (.001”, .002”, .005”). Other versions of Kapton® tape include ESD (Electro-Static Dissipative with silicone adhesive) or Kapton® with acrylic adhesive. Kapton® tape can be used as a fastener for other printing components due to its heat resistance of 500°F (260°C).
*CS Hyde Company has capabilities to cut Kapton® to any specification, including specific 3D print bed requirements.
*CS Hyde Company can apply a variety of 3M adhesives customized to specific film size.
/Asset/3D_Kapton.JPG3D Printing: Polyester PET Tape
(2)Polyester (PET) Tape with silicone adhesive is a low cost alternative yet efficient surface material for 3D Printing. Polyester tapes offer excellent thermal, abrasion, and chemical resistance while maintaining flexibility. PET Tape with silicone adhesive allows the tape to adhere to tough to stick surfaces and can be removed cleanly with no residuals. PET Tapes provide a smooth dependable surface platform for 3D designs.
Polyester (PET) Tape is also used for high temperature masking tape. Applications include powder coating, spray coating, plating, electro-plating, anodizing, and high temperature splicing tape.
Kapton® (Polyimide) Tape (-100°F to +500°F) is used when temperatures exceed that of Polyester (up to 400°F).
*CS Hyde Company has capabilities to cut PET to any specification, including specific 3D print bed requirements.
*CS Hyde Company can apply a variety of 3M adhesives customized to specific film size.
/Asset/3D_GreenPET_Film.jpg3M™ "Painters Tape"
3M™ UV14 “Painters Tape” has been a trademark print surface for many years now. ABS and PLA prints adhere well to the tape, and parts are easily removable. This tape can easily be applied and removed if required for a new print. Many 3D printing enthusiasts have strayed away from this tape due to the lack of roll width, requiring them to apply several strips to their print bed. Look no further, CS Hyde Company can cut to width, sheet, or part upon request.
Custom Print Bed Dimensions Availible: Email resources@cshyde.com for your print bed quote.
3M™ Transfer Adhesive Sheets-467MP & 468MP
(4)2 mil. 3M™ 467MP
5 mil. 3M™ 468MP
Temperature:
Long term (days/weeks) 300°F (149°C)
Adhesive Remover
(2) This fast-acting citrus based adhesive and mastic remover is derived from a natural citrus peel extract that effectively and safely removes adhesive residue. It’s specifically designed to quickly dissolve the sticky remnants of glues, adhesives, labels, stickers, decals, and inks. Even black mastics and carpet glues quickly liquefy when our adhesive remover is applied. Can be used safely on labeling machinery, screen printing equipment, rollers and cutting blades, windows and glass, and textile equipment. /Asset/BioBreakdown.jpgUltem® PEI
(71)Ultem®/PEI (polyetherimide) has struck the 3D printing world as a high performance material for 3D printing beds. Ultem®/PEI film enables 3D printing enthusiasts to produce both ABS and PLA prints. This film offers extreme heat resistance, coupled with high mechanical strength, stiffness, UV stability, and broad chemical resistance. This combination of properties allows this film to be utilized in a wide variety of demanding new design concepts including aerospace, automotive, and even medical applications. PEI is a functional product for 3D printing due to its extremely smooth finish, high temperature resistance, and ability to provide print placement security while releasing prints smoothly. Ultem/PEI is a “no surface prep” material which allows for no major surface modifications like applying special solutions or tapes before each print. We do recommend a light wipe down of the sheet with isopropyl alcohol once in awhile.
* (If possible) Recalibrate your machine after install.
(Similar to PEEK, Ultem® can be considered a more cost effective solution if continuous temperatures are below 338°F). Ultem®/PEI has a UL94 flame resistance rating of VTM-0, is FDA compliant, EU Food Contact Compliant, and ISO10993 compliant in natural color.
Adhesive Temperature:
Short term (minutes/hours)- 400°F (204°C)
Long term (days/weeks)- 300°F (149°C)
Please Note:
3 mil. = .003"
5 mil. = .005"
10 mil. = .01"
20 mil. = .02"
40 mil. - .04"
*CS Hyde Company has capabilities to cut Ultem®/PEI film to any specification, including specific 3D print bed requirements.
*CS Hyde Company can apply a variety of 3M™ adhesives customized to specific film size.
*NOTE: Adhesive can be applied to either (Matte) side or (Gloss) side of Ultem® Film.
(Standard method: Adhesive is applied to the Matte side of the film, unless customer advises otherwise).
*International Customers: SHIPPING CALCULATOR COSTS MAY VARY! Email: Resources@cshyde.com with zip code for a shipping estimate
Aluminum Foil Tape Sheets & Discs
(3) Auto-leveling sensors (Induction Sensors) have become one of the most desired 3D Printer Modifications. These new sensors accelerate prep time limiting countless adjustments to springs and screws on the print bed. Using a sensor helps obtain more accurate calibrations creating a more level bed, limiting the possibilities of prints coming undone on one or corner or nozzle jams from incorrect nozzle height.
However upgrading the sensor limits the type of surface material you can use on the print plate. Induction sensors (using electro magnetism) use aluminum to detect the build plate. Through our research we have found that PEI is the top of the charts as a build surface. However PEI can not be used with a induction sensor without using a metalized material (aluminum) underneath. Here at CS Hyde we wanted to provide a cost effective solution to the PEI/Sensor issue. Our aluminum foil sheets backed with high temp adhesive allow users to securely place the aluminum sheet onto the glass bed, place PEI sheet on top of aluminum sheet, calibrate the sensor, and print right onto the PEI with no issues. Our combination of aluminum sheets and thin PEI sheets make this a hassel free project, without purchasing a costly aluminum build plate. You can locate our catergory of PEI in the 3D Printing category. We recommend using silicone backed PEI, due to the temperature properties.
We also supply aluminum foil discs that can be strategically placed at 4 points, if you do not want to cover your glass entirely.
Temperature Range: -30ºF to 325ºF (-34ºC to 163ºC)
Foil Thickness: 3.0 mils (0.08mm)
Tape Thickness w/out Liner: 4.5 mils (0.12mm)