- All Categories
- Adhesive Tapes
- PTFE Tapes made with Teflon™ fluoropolymers
- UHMW Polyethylene Tape
- Kapton® (Polyimide) Tape
- Teflon™ PTFE Coated Fiberglass Tapes
- Silicone Strip n Stick® Tape- Gasket Tape
- Fiberglass Tape (Woven Glass Cloth Tape)
- Thermal & Plasma Flame Spray Masking Tape
- Specialty Film Tapes
- Clear/Transparent Adhesive Tapes
- 3M™ Adhesive Transfer Tapes- Rolls & Sheets
- 3M™ VHB Tape- 4941/4905- Rolls & Sheets
- Foil Tapes & (AFD) Foil Tape Discs
- Double Sided Adhesive Tapes
- Delrin® Tape with Adhesive
- FEP Optically Clear Tape made with Teflon™ fluoropolymers
- Rulon® Tape with Adhesive (bearing tape)
- FST Tape made with Teflon™ fluoropolymers
- Kevlar® / Aramid Fiber Tape with PSA Adhesive
- Metalized Polyester Tape
- Polyurethane Foam Tape- High Density Foam
- Mylar® Film Tape with Adhesive
- Optically Clear Polyester Tape with Adhesive
- Polycarbonate Film Tape with Adhesive
- Polyester (PET) Tape with Silicone Adhesive
- Self Fusing Silicone Tape
- Vinyl Tape
- Silicone Strip n' Stick® Tape
- Utility Grade Cloth Duct Tape
- Adhesive Remover
- Electrical Tape
- High Performance Polymer Films
- ABS Film
- Acetal (Polyoxymethylene) POM Film
- Delrin® Film
- Anti-Static UHMW Film (BLACK)
- 3M™ ESR Reflector Film
- FEP & PFA Optically Clear Film made with Teflon™ fluoropolymers
- HALAR® ECTFE Film
- HDPE Polyethylene Film (High Strength)
- Hytrel® (TPE) Film
- Aluminum Polyimide Film
- Thick Polyimide Film
- Cirlex® Kapton® Film
- Kapton® (Polyimide) Film - Type FN
- Kapton® (Polyimide) Film - Type HN
- Kapton® (Polyimide) Film - Type XC
- Kapton® (Polyimide) Film - Type MT
- Kapton (Polyimide) Film- Type FPC
- Mylar® Polyester (PET Film)
- Optically Clear PETG Film
- Optically Clear Polyester Film Rolls
- Metalized Polyester PET film
- Nylon 6/6 Film
- PEEK™ Film
- ULTEM® PEI (Polyetherimide Resin) Film
- PES ULTRASON (Polyethersulfone Resin) Film
- Polycarbonate Film- Clear & Velvet Matte
- Polypropylene (PP) Film
- PPS Film (Polyphenylene sulfide)
- PSU / UDEL® Film (Polysulfone Resin) FDA Compliant, Transparent
- PVDF / KYNAR® (Polyvinylidene Fluoride Resin) Film
- PTFE Film made with made with Teflon™ fluoropolymers
- Tefzel® (ETFE) Optically Clear Film (General Purpose Grade)
- TPX® Polymethylpentene Film
- UHMW Polyethylene Film
- Teflon™ PTFE Coated Fabrics & Non-Coated Fabrics
- Standard Grade- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers (42)
- Ultra Premium Grade- PTFE Coated Glass Fabric made with made with Teflon™ fluoropolymers
- Mechanical Grade- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Tear & Crease Resistant- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Kevlar® Fabric
- Black Anti-Static PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Tef-Lam Fiberglass PTFE Laminate Fabric
- Controlled Porosity PTFE Fabric
- Silicone Coated Fiberglass Fabric
- Silicone Coated 1 Side / Wash Coat Fabric
- 2 Ply Textured Silicone Coated Fiberglass Fabric
- 3 Ply Textured Silicone Coated Fiberglass Fabric
- Kevlar® Aramid Fabric
- Semi Porous Fiberglass Fabric made with Teflon™ fluoropolymers
- Porous PTFE Mesh Belting
- Kevlar® fabric Coated with PTFE
- Silicone Rubber Sheeting
- Commercial Grade Solid Silicone Rubber Sheet
- FDA Approved Solid Silicone Rubber Sheet
- Translucent Solid Silicone Rubber Sheet
- Medical Grade Solid Silicone Rubber Sheet
- Specification Grade Solid Silicone Rubber Sheet
- Fiberglass Reinforced Solid Silicone Rubber Sheet
- Flame Retardant Solid Silicone Rubber Sheet
- Solid Silicone (Fluorosilicone) Rubber Sheet
- Electrically Conductive Solid Silicone Rubber Sheet
- High Temperature Solid Silicone Rubber Sheet
- High Strength Solid Silicone Rubber Sheet
- Thermally Conductive Solid Silicone Rubber Sheet
- Flame Retardant Silicone Foam
- Commercial Grade Silicone Sponge Rubber Sheet
- Flame Retardant Silicone Sponge Rubber Sheet
- Fiberglass Reinforced Silicone Sponge Rubber Sheet
- Low Compression Set Silicone Sponge Rubber Sheet
- Thermally Conductive Silicone Sponge Rubber Sheet
- Silicone Coated Fiberglass Fabric
- Silicone Coated 1 Side / Wash Coat Fabric
- 2 Ply Textured Silicone Coated Fiberglass Fabric
- 3 Ply Textured Silicone Coated Fiberglass Fabric
- Silicone Strip n Stick® Tape- Gasket Tape
- Silicone Strip n' Stick® Tape
- Self Fusing Silicone Tape
- Silicone Strip n Stick® Tape- Gasket Tape
- Strip-N-Stick medium density silicone sponge w/ silicone adhesive- 7-100S
- Strip-N-Stick medium density silicone sponge w/ acrylic adhesive- 7-200A
- Strip-N-Stick fiberglass reinforced sponge w/ acrylic adhesive- 7-300AR
- Strip-N-Stick solid silicone rubber 30 duro w/ acrylic adhesive- 7-440A
- Strip-N-Stick solid silicone rubber 30 duro w/ silicone adhesive- 7-440S
- Strip-N-Stick grey flame resistant silicone foam w/ acrylic adhesive- 7-512AF
- 3M™ Adhesive Products
- Threads, Cords, Kevlar, VELCRO®
- PTFE Belting
- Porous PTFE Mesh Belting
- Standard Grade Fiberglass Tape made with Teflon™ fluoroplastic
- Anti-Static fabric made with Teflon™ fluoroplastic
- Semi Porous Fiberglass Fabric made with Teflon™ fluoropolymers
- Silicone Coated Fiberglass Fabric
- Ultra Premium Fiberglass Fabric made with Teflon™ fluoroplastic
- Kevlar® Premium Grade Fabric Coated with PTFE
- Tef-Lam Fiberglass Fabric Laminated with PTFE
- Teflon™ PTFE fluoropolymer Products
- Teflon™ PTFE Sheets, Rods and Rectangles
- 3D Printing Materials
- Application Specific
- Clear Plastic Films for Face Shields, Sneeze Guards, Sanitary Barriers
- Abrasion/Impact Resistance
- Chemical Resistance
- Dielectric Strength
- Flame Resistance
- FDA Approved Substrates
- Medical Grade Products
- Low Friction Heat Sealer Tapes
- Clear-Transparent: Plastic Products
- 3D Printing Materials
- Stock Plastic Film & Tape Sheets
- Stock Die-Cut Parts- Dots, Squares, Washers
- Thermal & Plasma Flame Spray Masking Tape
- C4-NGEN® Mousepads & Gear
- Other Applications
- More Products
- PTFE Beading (Cord), small diameter
- PTFE Lacing Tape (Flat Braid)
- PTFE Tie Cord (Round Braid)
- PTFE Thread Seal Tape
- Kevlar® Thread
- Nylon Thread (Bonded)
- Polyester Anti-Static Conductive Thread
- Polyester Thread (Bonded)
- PTFE Coated Fiberglass Thread
- PTFE coated Quartz Thread
- Polycarbonate (Machine Grade)
- 56-HKIT
- 56-HS-9
- Tacking Iron Models
- Sale Specials
- Stock Die-Cut Parts- Dots, Squares, Washers
- Converting & Sheeting
- Adhesive Tapes
-
Films
ies-application-specific-chemical-resistance-films
-
ABS Film
ABS Film
(17)CS Hyde’s impact absorbing ABS (Acrylonitrile Butadiene Styrene) film is made from Cycolac resin and features a temperature range of 40F to 140F continuous, a tensile strength of 5700PSI, Rockwell R100 hardness rating, and a light translucent beige color.
This glossy film sheet is commonly used in medical devices, housewares, automobiles, and business equipment. It is chemical and impact resistant plus it offers toughness and rigidity. Unless otherwise noted, we sell this film by the continuous lineal foot. Custom sized sheeting available. -
HALAR® ECTFE Film
Halar ® ECTFE (Ethylene-chlorotrifluoroethylene) Film provides excellent purity, chemical resistance, good electrical properties, a broad-use temperature range from cryogenic to 300°F (150°C), and meets the requirements of UL-94 V-0 vertical flame test in thicknesses as low as 7 mils (0.18 mm).
It is a tough material with excellent impact strength and wear resistance. Halar® 300 resin. Custom sized sheeting available.
Applications for ECTFE (Halar®) Film:
• Filters
• Diaphragms
• Release films
• Cable insulation
• Solar collector panels
• Coaxial and fiber optic wrap film
• Medical bags
Advantages of ECTFE (Halar®) Film:
• Excellent purity
• Excellent chemical resistance
• Low permeability
• Excellent abrasion resistance
• Excellent temperature resistance
-
Tefzel® (ETFE) Optically Clear Film (General Purpose Grade)
Tefzel® Optically Clear Film is an extremely durable, thin polymeric film closely related to PTFE fluorocarbon resin. Of all the PTFE fluoropolymer family, Tefzel® (ETFE) is the most tough/ durable. Flexible and nearly 100 percent transparent, Tefzel® Optically Clear Film has excellent mechanical strength and reliability against cracking and abrasion. In outdoor applications, Tefzel® shows very little degradation over a long period of time despite constant UV radiation exposure, making it a suitable long term substitute for glass. Tefzel® Optically Clear Film features easy processibility and high-energy radiation resistance.
Film types are:Type LZ--General-purpose film, Type CLZ--Treated one-side for improved cementability, and Type CLZ-20--Treated both sides for improved cementability. Tefzel® films can be thermoformed, laminated, heat-sealed, die-stamped, and oriented for use in many applications including high flex lightweight wiring insulation, composite part mold release, anti-corrosive valve linings, non-stick roll covers, rupture disks, high frequency microwave circuitry, pharmaceutical cap liners, sterile packaging, cable insulation, microphone electret membranes, photovoltaic cell glazing, anti-graffiti coverings, erasable surface coverings, automotive airbag systems, fuel hose permeation barrier, hot melt adhesive and thousands more possible applications. -
Polycarbonate Film- Clear & Velvet Matte
CS Hyde Company supplies three types of high performance polycarbonate film; Clear Polycarbonate-type GG (gloss/gloss surface), Clear Hard Coated Polycarbonate- Type HC, and Translucent Hazy Polycarbonate- type VM (Velvet/Matte surface). Polycarbonate films have exceptional impact strength, weatherability and thermoformability. Our clear polycarbonate film is idea for optical clarity applications that also require high impact strength properties. Velvet/Matte polycarbonate is also available that is translucent in color and can be used for privacy applications while maintaining high impact strength. Common plastics associated with polycarbonate include Acrylic, Mylar®, Polyester, and PETG. In comparison, Polycarbonate has a higher impact strength than most acrylic and PETG, and better dimensional stability than Mylar® or Polyester (PET). Polycarbonate film is a great all-around high-performance material for various applications. Polycarbonate rolls or sheets available in .005”, .010", .015", and .020" thicknesses. Longer lengths, special widths.
If your application requires clear clarity and abrasion, scratch, and chemical resistance view: Polycarbonate (Hard-Coated)
Polycarbonate Adhesive Tape rolls and sheets are also available. Our in house lamination capabilities enable us to produce 3M™ pressure sensitive adhesive backed polycarbonate sheets and rolls. An ideal option for eliminating mechanical fastening.Applications: Nameplates, Label Instrument, cluster panels, Graphic Overlays, Membrane Switches & Control Panels
38-GG Clear Polycarbonate Properties: (38-VM Velvet Matte Polycarbonate properties sheet can be found in downloads section)
PHYSICAL PROPERTIES:PROPERTY
TYPICAL VALUE
UNITS
TEST METHOD
Specific Gravity
1.2
ASTM D792
Conversion Factor
160
ft²/lb-mil
Water Absorption
(Immersion @ 73ºF 24 hrs.)
0.33
%
ASTM D570
First Surface Gloss- 60º angle, black inked second surface
≥98
Gloss unit
ASTM D2457
First Surface Roughness R3Z
≥0.5
Microns
ISO 4288
THERMAL PROPERTIES:
PROPERTY
TYPICAL VALUE
UNITS
TEST METHOD
Heat Deflection Temp.
ISO 75
1.62 Mpa
270
ºF
0.45 Mpa
288
ºF
Viscat Softening Temp.
315
ºF
ISO 306
OPTICAL PROPERTIES:
PROPERTY
TYPICAL VALUE
UNITS
TEST METHOD
Haze
0.3
%
ASTM D1003
Light transmission
91
%
ASTM D1003
Yellowness index
1
ASTM E313
MECHANICAL PROPERTIES:
PROPERTY
TYPICAL VALUE
UNITS
TEST METHOD
Tensile Strength, Yield
8,800
Psi
ASTM D882
Tensile Strength, Break
8,700
Psi
ASTM D882
Elongation @ Break
120
%
ASTM D882
Tear Strength, Initiation
1,100
Lb/in
ASTM D1004
-
PEEK™ Film
PEEK™ Film
(24)PEEK™ film has extremely high temperature resistance combined with excellent mechanical, electrical, and chemical resistance making it a high performance semi-crystalline thermoplastic suitable for use in a wide variety of demanding applications.
Mechanically, this film is capable of a high tensile strength of 18.9 kpsi (130 MPa), a flexural strength of 23.6kpsi (163 MPa) and a Rockwell hardness of 99 (R Scale).
PEEK™ film is capable of maintaining its properties up to very high temperatures (continuous use of -70 to 500F), is UL RTI rated up to 464F, and has a melting point of 644F. PEEK™ also boasts a heat deflection temperature (1.8MPa) of 306F. 0.012-0.280mm thickness carries an HB flammability rating, while 0.50-0.75mm has a V-1 rating.
PEEK™ meets many aerospace, automotive, fire, smoke and toxicity, food/water, medical/pharmaceutical, and military approvals and standards. Custom sized sheeting available. PEEK™ is available with adhesive as well, exclusively from CS Hyde Company as PEEK Tape.
PEEK™ Film complies with the compositional requirements of the Code of Federal regulations FDA 21 CFR 177.2415 of the Food and Drug Administration (FDA) of the United States of America. -
ULTEM® PEI (Polyetherimide Resin) Film
Ultem®/PEI (polyetherimide) film offers high heat resistance, coupled with high mechanical strength, stiffness, UV stability, and broad chemical resistance. This combination of properties proves the ability of this film to be used for a wide variety of demanding new design concepts. Similar to PEEK, Ultem® can be considered a more cost effective solution if continuous temperatures below 338F are acceptable per the application. It has a UL94 flame resistance rating of VTM-0, is FDA compliant, and is thermoformable. Custom sized sheeting available.
-
Kapton® (Polyimide) Film - Type HN
DuPont™ Kapton® Type HN Film:
Kapton® Type HN film is a tough, aromatic polyimide film, exhibiting an excellent balance of physical, chemical, and electrical properties over a wide temperature range. Kapton® has been successfully used in applications at temperatures as low as -452°F (-269°C) and as high as 752°F (400°C).
Chemically, its polyimide polymer makeup is the result of a polycondensation reaction between pyromellitic dianhydride and 4,4.diaminodiphenyl ether. Kapton does not melt or burn and has excellent chemical resistance; there are no know organic solvents for the film.
Kapton® HN film meets ASTM D-5213 (type 1, item A) & Mil-P-46112 requirements, & UL-94 Flammability rating: V-0.
Kapton® is a Registered Trademark of E.I. du Pont de Nemours and Company used under license by CS Hyde Company.
Kapton® HN Film Applications include:
Mechanical parts, electronic parts, electrical insulation, fiber optics cable, insulation blankets and tubing, automotive diaphragm sensors and manifolds, etching and shim stock.
CS Hyde can convert Kapton® HN film to produce custom width rolls, sheets, or die cut parts. Learn More Here
Kapton® film tape also available- View Kapton® PSA Tapes
-
TPX® Polymethylpentene Film
TPX® (Polymethylpentene, or PMP) has remarkable combination of transparency and resistance to heat/chemicals. Some of its distinguishing characteristics include its low moisture absorption, exceptional electrical and acoustical properties, good chemical resistance, high heat resistance, and transparency.
3 mil. and 5 mil. TPX® has a gloss/matte surface
10 mil. TPX® Film has a Gloss (polish)/matte surface (*limited availability matte/matte) specify when ordering to confirm availability
20 mil. TPX® has a matte/matte surface
TPX resin is FDA compliant, and has the lowest specific gravity of any known thermoplastic. It is thermoformable at temps of 248°F to 428°F depending on thickness, and thicker film should be preheated before forming.
Used in wide variety of applications including speaker cones, gas separating membranes, release films, and carrier films for ceramic slurry. TPX° DX845 resin. -
PSU / UDEL® Film (Polysulfone Resin) FDA Compliant, Transparent
PSU Udel is a tough, rigid, high-strength, amorphous thermoplastic that maintains its properties over a wide temperature range. It has good electrical properties, clarity and toughness, plus exceptional steam resistance and thermoformability. It is used widely in food service, electronics, medical devices, chemical process equipment and automotive industries.
Base UDEL® P-1700 resin. Resin is FDA compliant.