- All Categories
- Adhesive Tapes
- PTFE Tapes made with Teflon™ fluoropolymers
- UHMW Polyethylene Tape
- Kapton® (Polyimide) Tape
- Teflon™ PTFE Coated Fiberglass Tapes
- Silicone Strip n Stick® Tape- Gasket Tape
- Fiberglass Tape (Woven Glass Cloth Tape)
- Thermal & Plasma Flame Spray Masking Tape
- Specialty Film Tapes
- Clear/Transparent Adhesive Tapes
- 3M™ Adhesive Transfer Tapes- Rolls & Sheets
- 3M™ VHB Tape- 4941/4905- Rolls & Sheets
- Foil Tapes & (AFD) Foil Tape Discs
- Double Sided Adhesive Tapes
- Delrin® Tape with Adhesive
- FEP Optically Clear Tape made with Teflon™ fluoropolymers
- Rulon® Tape with Adhesive (bearing tape)
- FST Tape made with Teflon™ fluoropolymers
- Kevlar® / Aramid Fiber Tape with PSA Adhesive
- Metalized Polyester Tape
- Polyurethane Foam Tape- High Density Foam
- Mylar® Film Tape with Adhesive
- Optically Clear Polyester Tape with Adhesive
- Polycarbonate Film Tape with Adhesive
- Polyester (PET) Tape with Silicone Adhesive
- Self Fusing Silicone Tape
- Vinyl Tape
- Silicone Strip n' Stick® Tape
- Utility Grade Cloth Duct Tape
- Adhesive Remover
- Electrical Tape
- High Performance Polymer Films
- ABS Film
- Acetal (Polyoxymethylene) POM Film
- Delrin® Film
- Anti-Static UHMW Film (BLACK)
- 3M™ ESR Reflector Film
- FEP & PFA Optically Clear Film made with Teflon™ fluoropolymers
- HALAR® ECTFE Film
- HDPE Polyethylene Film (High Strength)
- Hytrel® (TPE) Film
- Aluminum Polyimide Film
- Thick Polyimide Film
- Cirlex® Kapton® Film
- Kapton® (Polyimide) Film - Type FN
- Kapton® (Polyimide) Film - Type HN
- Kapton® (Polyimide) Film - Type XC
- Kapton® (Polyimide) Film - Type MT
- Kapton (Polyimide) Film- Type FPC
- Mylar® Polyester (PET Film)
- Optically Clear PETG Film
- Optically Clear Polyester Film Rolls
- Metalized Polyester PET film
- Nylon 6/6 Film
- PEEK™ Film
- ULTEM® PEI (Polyetherimide Resin) Film
- PES ULTRASON (Polyethersulfone Resin) Film
- Polycarbonate Film- Clear & Velvet Matte
- Polypropylene (PP) Film
- PPS Film (Polyphenylene sulfide)
- PSU / UDEL® Film (Polysulfone Resin) FDA Compliant, Transparent
- PVDF / KYNAR® (Polyvinylidene Fluoride Resin) Film
- PTFE Film made with made with Teflon™ fluoropolymers
- Tefzel® (ETFE) Optically Clear Film (General Purpose Grade)
- TPX® Polymethylpentene Film
- UHMW Polyethylene Film
- Teflon™ PTFE Coated Fabrics & Non-Coated Fabrics
- Standard Grade- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers (42)
- Ultra Premium Grade- PTFE Coated Glass Fabric made with made with Teflon™ fluoropolymers
- Mechanical Grade- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Tear & Crease Resistant- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Kevlar® Fabric
- Black Anti-Static PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Tef-Lam Fiberglass PTFE Laminate Fabric
- Controlled Porosity PTFE Fabric
- Silicone Coated Fiberglass Fabric
- Silicone Coated 1 Side / Wash Coat Fabric
- 2 Ply Textured Silicone Coated Fiberglass Fabric
- 3 Ply Textured Silicone Coated Fiberglass Fabric
- Kevlar® Aramid Fabric
- Semi Porous Fiberglass Fabric made with Teflon™ fluoropolymers
- Porous PTFE Mesh Belting
- Kevlar® fabric Coated with PTFE
- Silicone Rubber Sheeting
- Commercial Grade Solid Silicone Rubber Sheet
- FDA Approved Solid Silicone Rubber Sheet
- Translucent Solid Silicone Rubber Sheet
- Medical Grade Solid Silicone Rubber Sheet
- Specification Grade Solid Silicone Rubber Sheet
- Fiberglass Reinforced Solid Silicone Rubber Sheet
- Flame Retardant Solid Silicone Rubber Sheet
- Solid Silicone (Fluorosilicone) Rubber Sheet
- Electrically Conductive Solid Silicone Rubber Sheet
- High Temperature Solid Silicone Rubber Sheet
- High Strength Solid Silicone Rubber Sheet
- Thermally Conductive Solid Silicone Rubber Sheet
- Flame Retardant Silicone Foam
- Commercial Grade Silicone Sponge Rubber Sheet
- Flame Retardant Silicone Sponge Rubber Sheet
- Fiberglass Reinforced Silicone Sponge Rubber Sheet
- Low Compression Set Silicone Sponge Rubber Sheet
- Thermally Conductive Silicone Sponge Rubber Sheet
- Silicone Coated Fiberglass Fabric
- Silicone Coated 1 Side / Wash Coat Fabric
- 2 Ply Textured Silicone Coated Fiberglass Fabric
- 3 Ply Textured Silicone Coated Fiberglass Fabric
- Silicone Strip n Stick® Tape- Gasket Tape
- Silicone Strip n' Stick® Tape
- Self Fusing Silicone Tape
- Silicone Strip n Stick® Tape- Gasket Tape
- Strip-N-Stick medium density silicone sponge w/ silicone adhesive- 7-100S
- Strip-N-Stick medium density silicone sponge w/ acrylic adhesive- 7-200A
- Strip-N-Stick fiberglass reinforced sponge w/ acrylic adhesive- 7-300AR
- Strip-N-Stick solid silicone rubber 30 duro w/ acrylic adhesive- 7-440A
- Strip-N-Stick solid silicone rubber 30 duro w/ silicone adhesive- 7-440S
- Strip-N-Stick grey flame resistant silicone foam w/ acrylic adhesive- 7-512AF
- 3M™ Adhesive Products
- Threads, Cords, Kevlar, VELCRO®
- PTFE Belting
- Porous PTFE Mesh Belting
- Standard Grade Fiberglass Tape made with Teflon™ fluoroplastic
- Anti-Static fabric made with Teflon™ fluoroplastic
- Semi Porous Fiberglass Fabric made with Teflon™ fluoropolymers
- Silicone Coated Fiberglass Fabric
- Ultra Premium Fiberglass Fabric made with Teflon™ fluoroplastic
- Kevlar® Premium Grade Fabric Coated with PTFE
- Tef-Lam Fiberglass Fabric Laminated with PTFE
- Teflon™ PTFE fluoropolymer Products
- Teflon™ PTFE Sheets, Rods and Rectangles
- 3D Printing Materials
- Application Specific
- Clear Plastic Films for Face Shields, Sneeze Guards, Sanitary Barriers
- Abrasion/Impact Resistance
- Chemical Resistance
- Dielectric Strength
- Flame Resistance
- FDA Approved Substrates
- Medical Grade Products
- Low Friction Heat Sealer Tapes
- Clear-Transparent: Plastic Products
- 3D Printing Materials
- Stock Plastic Film & Tape Sheets
- Stock Die-Cut Parts- Dots, Squares, Washers
- Thermal & Plasma Flame Spray Masking Tape
- C4-NGEN® Mousepads & Gear
- Other Applications
- More Products
- PTFE Beading (Cord), small diameter
- PTFE Lacing Tape (Flat Braid)
- PTFE Tie Cord (Round Braid)
- PTFE Thread Seal Tape
- Kevlar® Thread
- Nylon Thread (Bonded)
- Polyester Anti-Static Conductive Thread
- Polyester Thread (Bonded)
- PTFE Coated Fiberglass Thread
- PTFE coated Quartz Thread
- Polycarbonate (Machine Grade)
- 56-HKIT
- 56-HS-9
- Tacking Iron Models
- Sale Specials
- Stock Die-Cut Parts- Dots, Squares, Washers
- Converting & Sheeting
- Adhesive Tapes
-
Films
lication-specific-abrasion-impact-resistance-films
-
Acetal (Polyoxymethylene) POM Film
If your design requires wear resistance, high flexural fatigue strength, toughness and creep resistance, think of CS Hyde Company. We carry and custom cut Celcon® Acetal POM (Polyoxymethylene) sheeting to your exact specification. Celcon® Acetal copolymer offers high strength and rigidity over a broad temperature range, low wear, toughness and resistance to repeated impact. These products also have superior dimensional stability, long-term creep resistance, long-term fatigue resistance and excellent resistance to moisture, chemicals and fuels (even oxygenated fuels and gasohol).
Acetal films are used extensively in injection molding and are readily able to be processed by other conventional techniques such as extrusion and compression, rotational, and blow molding. Celcon® Acetal film is suitable for 2-component hard-soft molding with thermoplastic elastomers, including SEBS, a styrene based elastomer.
Due to their versatility, Acetal film products are used in numerous applications such as gears, springs, clips, snap-fits, knobs and gaskets for fuel system components, toys, washing machines, hand tools, shower heads and seat belt buckles to name a few. Celcon® is also used to produce sheets, rod and slab stock shapes that can be machined to tight tolerance. Custom sized sheeting available.
Available with Adhesive -
UHMW Polyethylene Film
UHMW (ultra-high molecular weight polyethylene) has extremely high abrasion resistance, even exceeding that of steel. Coupled with broad chemical resistance and low coefficient of friction, UHMW is an extremely versatile engineering material for many severe duty service applications.
Slippery like PTFE but super abrasion and wear resistant, UHMW Polymers have a molecular weight average 10 times that of conventional high density polyethylene resins. This higher molecular weight gives UHMW polymers its unique combination of characteristics. Applications include inner and outer surfaces for potable water, chemical, fuel and hydraulic hoses, bottom surfaces for skis and snow boards, linings for chutes to decrease friction and wear, automotive weather stripping and thousands of other possible applications. CS Hyde Company offers UHMW film in a variety of thicknesses, from .003” (3mil) to .125” (125mil). Available with or without adhesive, in sheet, slit roll, and in custom and standard die-cut shapes. -
Delrin® Film
Delrin® Film
(5)Delrin® materials are based on formaldehyde polymerization, are highly crystalline, strong, rigid, and possess good moisture, temperature, and solvent resistance. Because Delrin® absorbs far less moisture than type 6 and type 6/6 nylons, it is widely used for many mechanical and industrial applications requiring closer tolerances and greater dimensional stability. Custom sized sheeting available.
-
Tefzel® (ETFE) Optically Clear Film (General Purpose Grade)
Tefzel® Optically Clear Film is an extremely durable, thin polymeric film closely related to PTFE fluorocarbon resin. Of all the PTFE fluoropolymer family, Tefzel® (ETFE) is the most tough/ durable. Flexible and nearly 100 percent transparent, Tefzel® Optically Clear Film has excellent mechanical strength and reliability against cracking and abrasion. In outdoor applications, Tefzel® shows very little degradation over a long period of time despite constant UV radiation exposure, making it a suitable long term substitute for glass. Tefzel® Optically Clear Film features easy processibility and high-energy radiation resistance.
Film types are:Type LZ--General-purpose film, Type CLZ--Treated one-side for improved cementability, and Type CLZ-20--Treated both sides for improved cementability. Tefzel® films can be thermoformed, laminated, heat-sealed, die-stamped, and oriented for use in many applications including high flex lightweight wiring insulation, composite part mold release, anti-corrosive valve linings, non-stick roll covers, rupture disks, high frequency microwave circuitry, pharmaceutical cap liners, sterile packaging, cable insulation, microphone electret membranes, photovoltaic cell glazing, anti-graffiti coverings, erasable surface coverings, automotive airbag systems, fuel hose permeation barrier, hot melt adhesive and thousands more possible applications. -
PEEK™ Film
PEEK™ Film
(24)PEEK™ film has extremely high temperature resistance combined with excellent mechanical, electrical, and chemical resistance making it a high performance semi-crystalline thermoplastic suitable for use in a wide variety of demanding applications.
Mechanically, this film is capable of a high tensile strength of 18.9 kpsi (130 MPa), a flexural strength of 23.6kpsi (163 MPa) and a Rockwell hardness of 99 (R Scale).
PEEK™ film is capable of maintaining its properties up to very high temperatures (continuous use of -70 to 500F), is UL RTI rated up to 464F, and has a melting point of 644F. PEEK™ also boasts a heat deflection temperature (1.8MPa) of 306F. 0.012-0.280mm thickness carries an HB flammability rating, while 0.50-0.75mm has a V-1 rating.
PEEK™ meets many aerospace, automotive, fire, smoke and toxicity, food/water, medical/pharmaceutical, and military approvals and standards. Custom sized sheeting available. PEEK™ is available with adhesive as well, exclusively from CS Hyde Company as PEEK Tape.
PEEK™ Film complies with the compositional requirements of the Code of Federal regulations FDA 21 CFR 177.2415 of the Food and Drug Administration (FDA) of the United States of America.