- All Categories
- Adhesive Tapes
- PTFE Tapes made with Teflon™ fluoropolymers
- UHMW Polyethylene Tape
- Kapton® (Polyimide) Tape
- Teflon™ PTFE Coated Fiberglass Tapes
- Silicone Strip n Stick® Tape- Gasket Tape
- Fiberglass Tape (Woven Glass Cloth Tape)
- Thermal & Plasma Flame Spray Masking Tape
- Specialty Film Tapes
- Clear/Transparent Adhesive Tapes
- 3M™ Adhesive Transfer Tapes- Rolls & Sheets
- 3M™ VHB Tape- 4941/4905- Rolls & Sheets
- Foil Tapes & (AFD) Foil Tape Discs
- Double Sided Adhesive Tapes
- Delrin® Tape with Adhesive
- FEP Optically Clear Tape made with Teflon™ fluoropolymers
- Rulon® Tape with Adhesive (bearing tape)
- FST Tape made with Teflon™ fluoropolymers
- Kevlar® / Aramid Fiber Tape with PSA Adhesive
- Metalized Polyester Tape
- Polyurethane Foam Tape- High Density Foam
- Mylar® Film Tape with Adhesive
- Optically Clear Polyester Tape with Adhesive
- Polycarbonate Film Tape with Adhesive
- Polyester (PET) Tape with Silicone Adhesive
- Self Fusing Silicone Tape
- Vinyl Tape
- Silicone Strip n' Stick® Tape
- Utility Grade Cloth Duct Tape
- Adhesive Remover
- Electrical Tape
- High Performance Polymer Films
- ABS Film
- Acetal (Polyoxymethylene) POM Film
- Delrin® Film
- Anti-Static UHMW Film (BLACK)
- 3M™ ESR Reflector Film
- FEP & PFA Optically Clear Film made with Teflon™ fluoropolymers
- HALAR® ECTFE Film
- HDPE Polyethylene Film (High Strength)
- Hytrel® (TPE) Film
- Aluminum Polyimide Film
- Thick Polyimide Film
- Cirlex® Kapton® Film
- Kapton® (Polyimide) Film - Type FN
- Kapton® (Polyimide) Film - Type HN
- Kapton® (Polyimide) Film - Type XC
- Kapton® (Polyimide) Film - Type MT
- Kapton (Polyimide) Film- Type FPC
- Mylar® Polyester (PET Film)
- Optically Clear PETG Film
- Optically Clear Polyester Film Rolls
- Metalized Polyester PET film
- Nylon 6/6 Film
- PEEK™ Film
- ULTEM® PEI (Polyetherimide Resin) Film
- PES ULTRASON (Polyethersulfone Resin) Film
- Polycarbonate Film- Clear & Velvet Matte
- Polypropylene (PP) Film
- PPS Film (Polyphenylene sulfide)
- PSU / UDEL® Film (Polysulfone Resin) FDA Compliant, Transparent
- PVDF / KYNAR® (Polyvinylidene Fluoride Resin) Film
- PTFE Film made with made with Teflon™ fluoropolymers
- Tefzel® (ETFE) Optically Clear Film (General Purpose Grade)
- TPX® Polymethylpentene Film
- UHMW Polyethylene Film
- Teflon™ PTFE Coated Fabrics & Non-Coated Fabrics
- Standard Grade- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers (42)
- Ultra Premium Grade- PTFE Coated Glass Fabric made with made with Teflon™ fluoropolymers
- Mechanical Grade- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Tear & Crease Resistant- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Kevlar® Fabric
- Black Anti-Static PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Tef-Lam Fiberglass PTFE Laminate Fabric
- Controlled Porosity PTFE Fabric
- Silicone Coated Fiberglass Fabric
- Silicone Coated 1 Side / Wash Coat Fabric
- 2 Ply Textured Silicone Coated Fiberglass Fabric
- 3 Ply Textured Silicone Coated Fiberglass Fabric
- Kevlar® Aramid Fabric
- Semi Porous Fiberglass Fabric made with Teflon™ fluoropolymers
- Porous PTFE Mesh Belting
- Kevlar® fabric Coated with PTFE
- Silicone Rubber Sheeting
- Commercial Grade Solid Silicone Rubber Sheet
- FDA Approved Solid Silicone Rubber Sheet
- Translucent Solid Silicone Rubber Sheet
- Medical Grade Solid Silicone Rubber Sheet
- Specification Grade Solid Silicone Rubber Sheet
- Fiberglass Reinforced Solid Silicone Rubber Sheet
- Flame Retardant Solid Silicone Rubber Sheet
- Solid Silicone (Fluorosilicone) Rubber Sheet
- Electrically Conductive Solid Silicone Rubber Sheet
- High Temperature Solid Silicone Rubber Sheet
- High Strength Solid Silicone Rubber Sheet
- Thermally Conductive Solid Silicone Rubber Sheet
- Flame Retardant Silicone Foam
- Commercial Grade Silicone Sponge Rubber Sheet
- Flame Retardant Silicone Sponge Rubber Sheet
- Fiberglass Reinforced Silicone Sponge Rubber Sheet
- Low Compression Set Silicone Sponge Rubber Sheet
- Thermally Conductive Silicone Sponge Rubber Sheet
- Silicone Coated Fiberglass Fabric
- Silicone Coated 1 Side / Wash Coat Fabric
- 2 Ply Textured Silicone Coated Fiberglass Fabric
- 3 Ply Textured Silicone Coated Fiberglass Fabric
- Silicone Strip n Stick® Tape- Gasket Tape
- Silicone Strip n' Stick® Tape
- Self Fusing Silicone Tape
- Silicone Strip n Stick® Tape- Gasket Tape
- Strip-N-Stick medium density silicone sponge w/ silicone adhesive- 7-100S
- Strip-N-Stick medium density silicone sponge w/ acrylic adhesive- 7-200A
- Strip-N-Stick fiberglass reinforced sponge w/ acrylic adhesive- 7-300AR
- Strip-N-Stick solid silicone rubber 30 duro w/ acrylic adhesive- 7-440A
- Strip-N-Stick solid silicone rubber 30 duro w/ silicone adhesive- 7-440S
- Strip-N-Stick grey flame resistant silicone foam w/ acrylic adhesive- 7-512AF
- 3M™ Adhesive Products
- Threads, Cords, Kevlar, VELCRO®
- PTFE Belting
- Porous PTFE Mesh Belting
- Standard Grade Fiberglass Tape made with Teflon™ fluoroplastic
- Anti-Static fabric made with Teflon™ fluoroplastic
- Semi Porous Fiberglass Fabric made with Teflon™ fluoropolymers
- Silicone Coated Fiberglass Fabric
- Ultra Premium Fiberglass Fabric made with Teflon™ fluoroplastic
- Kevlar® Premium Grade Fabric Coated with PTFE
- Tef-Lam Fiberglass Fabric Laminated with PTFE
- Teflon™ PTFE fluoropolymer Products
- Teflon™ PTFE Sheets, Rods and Rectangles
- 3D Printing Materials
- Application Specific
- Clear Plastic Films for Face Shields, Sneeze Guards, Sanitary Barriers
- Abrasion/Impact Resistance
- Chemical Resistance
- Dielectric Strength
- Flame Resistance
- FDA Approved Substrates
- Medical Grade Products
- Low Friction Heat Sealer Tapes
- Clear-Transparent: Plastic Products
- 3D Printing Materials
- Stock Plastic Film & Tape Sheets
- Stock Die-Cut Parts- Dots, Squares, Washers
- Thermal & Plasma Flame Spray Masking Tape
- C4-NGEN® Mousepads & Gear
- Other Applications
- More Products
- PTFE Beading (Cord), small diameter
- PTFE Lacing Tape (Flat Braid)
- PTFE Tie Cord (Round Braid)
- PTFE Thread Seal Tape
- Kevlar® Thread
- Nylon Thread (Bonded)
- Polyester Anti-Static Conductive Thread
- Polyester Thread (Bonded)
- PTFE Coated Fiberglass Thread
- PTFE coated Quartz Thread
- Polycarbonate (Machine Grade)
- 56-HKIT
- 56-HS-9
- Tacking Iron Models
- Sale Specials
- Stock Die-Cut Parts- Dots, Squares, Washers
- Converting & Sheeting
- Adhesive Tapes
PTFE Tapes made with Teflon™ fluoropolymers
CS Hyde is a supplier and converter of PTFE Tapes made with Teflon™ Fluoroplastic. PTFE (Teflon®) is one of the most chemically inert materials available and it does not support combustion, has a low coefficient of friction, and there are few substances that will stick to its surface. CS Hyde PTFE tapes have unique properties including non-stick, anti-friction, anti-static, high temperature resistance, and chemical resistance. PTFE tapes can either be coated with Teflon™ PTFE or constructed from skived or tensilized PTFE Film. Skived PTFE Tape is made by slicing natural PTFE into layers to achieve nominal thickness. Tensilized PTFE is made by stretching PTFE Fibers, this process helps create PTFE tape with high density or high tensile strength.
The most common PTFE coated tape is PTFE Coated Fiberglass or also know as “PTFE heat tape”. PTFE Fiberglass tapes consist of woven fiberglass fibers coated with Teflon™ PTFE. These tapes are widely used in packaging applications on heat sealers to seal bags or other similar products. PTFE Coated Fiberglass tapes are available with different grades of coating including: Standard and Ultra-Premium grade with either silicone or acrylic adhesive. Other PTFE coated tapes include Optically clear FEP Tape, FST Tape, R-Tape (Roller Tape), Para-Arimid Kevlar® Tape and TFL Laminate Tape.
CS Hyde supplies skived PTFE tape with high bond acrylic, standard acrylic and silicone adhesive in a thickness range (.002” to .010”). Thick gauge PTFE tape or “FAT” PTFE Tape is also available in a thickness ranges (.020”-.125”) with either acrylic or silicone adhesive.
Teflon™ Fluoroplastic is a trademark of The Chemours Company FC, LLC used under license by CS Hyde Company.
PTFE Tapes made with Teflon™ Fluoroplastic are available in slit to width rolls, sheets, and die cut parts. All stock products are available for same day shipping. CS Hyde offers discounts on quantity orders, and little to no minimums on custom orders.
/Asset/FATptfetape.jpgUHMW Polyethylene Tape
UHMW tape or (Ultra High Molecular Weight Polyethylene) tape is made of a high-performance thermoplastic film that is strong and versatile due to its high abrasion, impact, and wear resistance. UHMW tape is unique because it also has a non-stick, low friction surface similar to Telfon® PTFE but more durable due its abrasion resistance. These performance properties enable UHMW tape to be utilized for sound dampening or eliminating squeaks and rattles caused by adjacent part movement. Due to its properties many names can be associated with UHMW tape including: Slippery tape, Low-friction tape, Chute Tape, or Slick tape among different applications or industry.
Improve packaging- UHMW tape is widely utilized within the packaging industry specifically on conveyor systems because they are built with many adjacent moving pieces and have multiple locations that friction and abrasion occur. UHMW tape can be used to improve chutes, liners, and rail guide systems enabling boxes, products, or goods to move freely preventing jams and a potential line shut down.
Improve Surface Protection- UHMW Tape is effective as surface protection to improve worn down or sticking surfaces. UHMW’s slippery surface and impact and abrasion resistance makes this tape a great option to enhance different types of surfaces and bearings. The adhesive backing allows for easy peel stick installation eliminating the need for mechanical fastening. High Bond UHMW Tape adheres suitably to metallic or low surface energy surfaces including plastics, powder-coats, foams, and oily metals. Example applications include roller bearings, work benches, shipping tables, toolboxes or anywhere abrasion and impact could be detrimental.
Reduce Friction- UHMW tape can be used to reduce friction due to it slippery surface. This can be beneficial on several types of machinery that incorporate sliding components. For example, UHMW tape is commonly used in the woodworking industry on table saws and jigs to improve the sliding ability of the guide rails. It can also be utilized in building or home fabrication to reduce friction and improve functionality of door jams, windowsills, sliding doors, drawer slots, kitchen cabinets, and numerous other applications where friction becomes a problem.
CS Hyde supplies and converts several types of low friction UHMW tapes including:
High-Bond Acrylic UHMW Tape, Standard Acrylic UHMW Tape, Rubber adhesive UHMW Tape, Black Anti-Static UHMW Tape
UHMW Tape is available in sheets, specific widths, or custom die cut parts.
Kapton® (Polyimide) Tape
CS Hyde Company stocks and converts different types of adhesive backed Kapton® Polyimide tape.
Kapton® (Polyimide) Adhesive Tapes have superior dielectric strength, high temperature & chemical resistance as well as tear, puncture, and abrasion resistance. Kapton® Tape obtains its polymer performance properties because it is derived from DuPont® Kapton® Type HN Film. Kapton Polyimide tape can maintain its excellent physical, mechanical, and electrical properties over a wide temperature range making it ideal for wrapping, bonding, and mounting applications. Kapton® Polyimide tapes are most used in electrical applications such as coil insulation, capacitor and transformer wrapping, magnetic wire insulation, wave soldering and high temperature masking.
How is Kapton® tape used in industries today?
Kapton® has been around sincle the late 1960s. As today's technology advances many more electrical components are being integrated into industries like automotive, marine, aeronautical, aerospace, and locomotive. Kapton® Tape can be used to wrap wires, switches, diaphragms, sensors or heated coil components like those commonly found in seat heaters (warmers). Kapton® tape with silicone adhesive is rated (-100°F to 500°F). For more permanent applications that require more “high tack” adhesion Kapton® tape with acrylic adhesive rated (-20°F to 350°F) is recommended.
For electronic components that require extra protection from static damage during assembly or repair Electrostatic dissipative (ESD) polyimide tape is available. ESD polyimide tape helps provide protection from electrically charged objects that cause electric shorts or dielectric breakdown. ESD polyimide tape applications include masking gold contacts on PCBs or protecting sensitive components on circuit boards through manufacturing.
For fabricating or mounting applications requiring adhesive on two or both sides Double Sided Kapton® tape is recommended. This tape is constructed to fill the requirements of a high performance thermoplastic polyimide film along with the high temperature resistance of silicone adhesive for a broad range of electronic assembly and electrical insulation applications. For example, double sided Kapton® has been used as a mounting system to manufacture photovoltaic panels (solar panels). Double sided Kapton® tape provides high temperature insulation and its two-sided high temperature silicone adhesive limits the need for mechanical fastening.
When the application of Kapton® tape in some of these components require polyimide tape to be cut to a certain width or manufactured in to die cut parts like squares, washers, or circles. CS Hyde has in house converting capabilities to provide custom width rolls and die cut rolls with shapes designed for peel and stick application. Additionally, for more intricate Kapton® die cut parts we can utilize rotary die cutting or die less knife cutting that enables us to rapidly produce custom parts directly from a supplied .DXF drawing.
CS Hyde also stock diffrent types of DuPont® Kapton® FILM (no adhesive - see films section). CS Hyde can also supply slit to width Kapton® film rolls in 50 FT and 100 FT lengths.
DuPont™ and Kapton® are trademarks or registered trademarks of E.I. du Pont de Nemours and Company.
/Asset/Kaptontapes Group.jpg
Teflon™ PTFE Coated Fiberglass Tapes
Teflon™ PTFE coated fiberglass tapes are made up of fiberglass fabric tighly woven from fiberglass fibers, then coated with Teflon™ PTFE. Fiberglass fabric provides superior dimensional stability while PTFE coating provides a slippery, anti-friction release surface. PTFE Coated fiberglass tape are an excellent product for various packaging applications requiring release properties, extreme temperatures (up to 500ºF), chemical, and environmental resistance. PTFE coated fiberglass can be used to cover heat sealing jaws and elements on various types of equipment such as shrink wrap/L bar, blister packaging, and form/fill/seal machines. Available in standard or premium grade fiberglass, with silicone or acrylic adhesive, with or without peel-off liner. For applications not requiring adhesive backing we also supply Teflon™ PTFE coated fiberglass fabric by the lineal yard. Thicknesses ranging from .003” to .019”.
Standard Grade VS. Ultra Premium Grade Coated Fiberglass Tapes
The main difference between standard grade and premium grade coated fiberglass tapes is the grade of the fiberglass fibers and the amount of PTFE Coating. Our ultra-premium grade (10-SX and 10-AX Series) are composed of higher-grade fiberglass fibers and an extra coating of Teflon™ PTFE.
Silicone VS Acrylic Adhesive Systems
Silicone adhesive
- Recommend for high temperature applicationsIdeal for requiring clean release adhesive removal
- Silicone Adhesive rated up to 500°F
Acrylic Adhesive
- Recommended for moderate temperature applications
- Acrylic Adhesive rated -40°F to 375°F
- Ideal for applications requiring high initial tack and strong bond adhesion.
Teflon™ Fluoroplastic is a trademark of The Chemours Company FC, LLC used under license by CS Hyde Company.
/Asset/PTFEtapes.jpgSilicone Strip n Stick® Tape- Gasket Tape
CS Hyde is a supplier of Silicone Strip N Stick Tape also known as “silicone gasket tape”. These tapes have a carrier made from a closed-cell silicone sponge, fiberglass reinforced sponge, solid silicone, or low-density foam substrate. These gasket tapes are available with a silicone or acrylic adhesive backing protected by a peel-off liner. Strip-N-Stick® Tape offers superior service life, excellent conformability, flexibility and a service temperature ranging from -100°F to + 500°F (-73°C to + 260°C). Other benefits include a low compression set and high adhesion to a variety of substrates. Strip n stick gaskets tapes can be used for high and low temperature resistance, enclosure or door gasketing, vibration dampening, and thermal insulation. Gasket tapes are unique because they can conform to irregular surfaces, wrap over or around cylinders, or be formed to produce right angles. Strip n stick tapes are a cost-effective solution for one application use or a gasket not requiring custom tooling or intricate parts.
CS Hyde supplies strip n stick tape in widths ranging from .5”-2” wide in a variety of thicknesses and durometers. To learn more about the features of each gasket tape view options below. Order online- no minimum order quanity.
.
Fiberglass Tape (Woven Glass Cloth Tape)
(21)High Temperature Fiberglass tape or most known as Glass Cloth Tape, is a non-coated woven fiberglass fabric with a pressure sensitive silicone adhesive system on one or two sides. Glass cloth tapes are most used as high temperature masking tapes for flame spray applications or as high temperature electrical cable wraps. All fiberglass cloth tapes utilize silicone adhesive due to its temperature range of -100°F to +500°F.
Types of glass cloth tapes:
29468- Double Sided Fiberglass Tape:
Double Sided Fiberglass Tape with High Temperature Silicone Adhesive on both sides. Withstands temperatures from -100° to +500° F and has silicone adhesive on both sides for superior bonding.
17-FibGX- Premium Fiberglass Tape:
Premium Grade Fiberglass Tape is a pressure sensitive tape made of higher-grade woven glass fabric and high temperature silicone adhesive. The glass fabric has excellent abrasion and heat resistance. This product meets Federal Aviation Regulation Part 25.855 (a-1), and Govt. Specification Mil-I-19166C.
17-FibG- Standard Fiberglass Tape:
Standard grade fiberglass tape is made of woven glass fabric and high temperature silicone adhesive. This product also meets Govt. Specification Mil-I-19166C.
2975-497-410-Silicone Coated Glass:
497 and 2975 are white/410 is blue: silicone rubber-coated glass fabric with a high temperature silicone adhesive. The silicone rubber is tough and abrasion resistant to withstand high temperatures and grit blasting impact. The silicone adhesive provides excellent adhesion at high temperatures yet removes cleanly. *497 and 410 meet Pratt & Whitney Specification of PMC – 4458.
/Asset/fiberglasstapesmall.jpg
Thermal & Plasma Flame Spray Masking Tape
(40)CS Hyde Company has an extensive line of thermal spray and plasma flame spray tapes available. High temperature resistance (up to 550F) makes them ideal for plasma flame spray masking applications. Various Colors. Cut to width. Types include silicone coated fiberglass, foil coated fiberglass, double and triple-ply silicone & fiberglass tapes, and double sided fiberglass tape.
/Asset/Plasma Flame Spary Masking Tape group pt2.jpgSpecialty Film Tapes
CS Hyde specialty film tapes are composed of polymer films that normally do not have an adhesive backing. Specialty film tapes are produced utilizing in house lamination and precise roll slitting equipment. Types of adhesives we commonly laminate to polymer films include acrylic, silicone, and other specialty 3M® adhesives like conductive adhesive for EMI/RFI shielding applications. We can produce a custom film tape that meets your thickness, adhesion, and width or length requirements. Contact Us or Submit a quote for more info.
/Asset/Kynar Application-1.jpg3M™ Adhesive Transfer Tapes- Rolls & Sheets
(17)3M™ Adhesive Transfer Tapes are rolls of pressure-sensitive adhesive pre-applied to a special release liner. For application, the tape is simply pressed, adhesive side down, to a surface and the liner is peeled off. CS Hyde laminates 3M™ adhesives to a variety of polymer plastics, to produce specialty film tapes. Laminating transfer adhesive to plastics creates a peel and stick bonding or fastening solution no matter the application. We stock a variety of adhesive types including acrylic, silicone and modified acrylic transfer adhesives as well as specialty adhesives like conductive XYZ adhesive. Utilizing our on-site converting machinery, we can produce custom products to the dimensions of your application.
CHECK Availability: orders@cshyde.com /Asset/3m.jpg
3M™ VHB Tape- 4941/4905- Rolls & Sheets
(14) High strength 3M™ VHB™ tapes are used in many industries to replace mechanical fastening for permanent assembly in a variety of applications. This ideal tape fastener can be used on interior and exterior bonding applications. 3M™ VHB Tape is a great alternative fastener to replace rivets, spot welds, liquid adhesives, and other permanent fasteners.3M™ 4941- Multi-purpose acrylic adhesive on both sides of conformable foam.
- Multi-Purpose Acrylic- Ideal for medium surface energy substrates like metals, glass, some plastic polymers, as well as plasticized vinyl. The unique conformable foam provides excellent adhesion.
3M™ 4905- Clear adhesive ideal for applications where clear or colorless adhesive is required.
- General Purpose Acrylic: This adhesive bonds to most higher surface energy substrates including metal, glass and high surface energy plastics.
Foil Tapes & (AFD) Foil Tape Discs
(30) CS Hyde Company offers a number of high-performance/super-high temperature foil tape products. Products 2925, 407, 409, and 411 are foil/glass laminates and provide excellent reflective and conductive characteristics in high temperature applications. The silicone adhesive demonstrates excellent adhesion at elevated temperatures (500F+) with clean release. 2925, 407 and 409 are commonly used as plasma flame spray masking tape and as heat shielding in high temperature situations. The heavier duty 411 can be used in High Velocity Oxy-Fuel (HVOF) spraying applications.Products 498 and 501 are laminated with additional layers of silicone, providing superior protection in the most demanding HVOF applications.
AFD- Aluminum Foil Discs come in convenient pre-cut sizes (1/4”, ½”. ¾”, 1”, 2” 3”) so you can easily cover small areas and holes during paint stripping and electroplating. Great as a moisture and dust barrier. Foil Discs make excellent reflective target for laser or optical beams. Easy to store, handle & apply. Very flexible and conformable. Discs are thermally conductive, heat and light reflective, flame resistant, outdoor weatherable and can help dampen vibration. Discs are .003" thick aluminum foil with 0.0015" of acrylic adhesive. Temperature range is –30° to +325° F. Discs are sold per sheet or per roll with paper liner. Rolls are supplied on a cardboard spool with a 3" ID. /Asset/Foil_Tape.JPG
Delrin® Tape with Adhesive
(6) With the ease of positioning and fastening in mind, CS Hyde Company laminates adhesive to Delrin® sheet.Delrin® materials are based on formaldehyde polymerization, are highly crystalline, strong, rigid, and possess good moisture, temperature, and solvent resistance. Because Delrin® absorbs far less moisture than type 6 and type 6/6 nylons, it is widely used for many mechanical and industrial applications requiring closer tolerances and greater dimensional stability.
Delrin® Sheet has a 3M acrylic pressure sensitive adhesive with a Peel-Off Liner. For more specific adhesive properties, please request the adhesive data sheet.
/Asset/Delrin Film Tape-with adhesive.jpg
FEP Optically Clear Tape made with Teflon™ fluoropolymers
(24)FEP Optically Clear Teflon™ Tape is manufactured from DuPont™ FEP (fluorinated ethylene propylene) film, backed with high temperature pressure sensitive silicone adhesive rated to (-100°F-400°F). FEP tapes silicone adhesive backing exhibits great chemical resistance, electrical properties, and will remove cleanly with little or to no residue. FEP film itself possesses superior anti-stick, low friction, strength, puncture, chemical & solvent resistance surface properties. FEP film tapes complete composition is weather resistant, stable, and nontoxic making it a versatile performance tape for various applications and industries.
FEP Teflon® Tape Applications:
Coil & Transformer Insulation- FEP tape is primarily in electrical applications as coil and transformer insulation, cable termination insulation, and capacitor insulation due its high temperature resistance and dielectric strength of (9000 volts per mm).
Wire, Cable & Harnesses Wrapping- Due to FEP tape conformability and optical clarity this tape is an ideal choice for wiring applications that require “see through” identification.
Barrier Protection Tape- FEP tape can be used as a transparent surface barrier tape for extreme applications. Due to its high temperature, chemical, and weather resistance makes FEP Tape a performance option over common polyester surface protection tapes. Also, due to its optical clarity FEP tape could protect underlying painted substrates or label identification without affecting aesthetics.
CS Hyde also supplies FEP Film rolls without adhesive that can be heat sealed, thermoformed, heat bonded, welded, or even combined with other materials as carrier substrates or insulator films.
FEP Silicone Adhesive Thickness:
*Item # 23-FEP- .002" FEP Film with .0015" Silicone Adhesive
*Item # 23-5FEP- .005" FEP Film with .005" Silicone Adhesive
*Item # 23-2A-FEP .002" FEP Film with .0023" Acrylic Adhesive
Rulon® Tape with Adhesive (bearing tape)
(8) Rulon® Tape is manufactured from skived compounded PTFE Rulon® film material. The RU-Series is often referred to as bearing tape becuase its film surface is self-lubricating and its backing is conformable. Rulon combines a low coefficient of friction with high temperature stability. It also offers outstanding abrasion resistance, which equates to a 500-fold increase in wear resistance over PTFE in rotating bearing tests. The Rulon backing is chemically inert and offers excellent high temperature resistance. This tape construction is stable, non-toxic and weather resistant.Both Rulon® tapes have an 8.0 mil. substrate thickness and 2.0 mil. of pressure sensitive adhesive for the silicone system and 2.3 mil. of pressure sensitive adhesive for the acrylic system. /Asset/Rulon group picture.jpg
FST Tape made with Teflon™ fluoropolymers
(6) CS Hyde Company offers super tough FST Tape, a highly tensilized Skived PTFE tape featuring high temperature (-100 to +500F) silicone adhesive. The tensilized PTFE film has the highest per unit tensile strength of any PTFE product.FST PTFE Tape is used for roll protection in high speed, high temperature flat die extrusion of polyethylene coating and laminations. CS Hyde’s tensilized FST PTFE Tape can be used in place of 5480, 426, 2285-2, P422, 6445-02, and 923s. Maroon color.
/Asset/FST Group.jpg
Kevlar® / Aramid Fiber Tape with PSA Adhesive
(12)Kevlar® / Aramid and glass fibers combine to produce this lightweight, high-strength, abrasion-resistant material. Has Pressure Sensitive Adhesive. Very flexible with little stretching.
Kevlar® / Aramid Tape can be draped with minimal elongation. High tear strength & excellent dimensional stability. Good chemical & mildew resistance.
Unaffected by most acid and alkali solutions. Color =Light yellow. Self extinguishing, non-melting.
Strips- Woven tapes in narrow widths are ideal for wrapping water & steam piping, protecting hydraulic lines and as lagging & electrical insulation. Make gaskets, pipe wrap & insulating cable. For exceptionally tough mechanical applications. Excellent for use in high moisture & high flex applications.
PSA Kevlar® / Aramid Tapes - Aramid blend in a woven tape form with Pressure Sensitive Adhesive.
MINUMUMS MAY APPLY.
Metalized Polyester Tape
(26) CS Hyde’s Metalized Polyester Film tape is 0.9 mil thick with a vibrant, mirror-like finish. It is available in Six Bright Colors: Silver, Black, Gold, Red, Green, Blue. Cut rolls are 1" wide x 72 yards long. Custom widths are our specialty.This tape has an aggressive, long lasting acrylic adhesive that maintains excellent solvent resistance and long-term aging properties. Metalized Polyester tape will not discolor over time and is UV resistant. It is flexible and dimensionally stable to 302F. It also features high reflectivity of both light and heat radiation, excellent heat resistance and easy unwind characteristics.
Metalized Polyester can be used for splicing in high temperature applications and for a sensing tape for automated equipment used in sorting and counting. It can also be used in photo sensing applications to detect splices to facilitate roll change-over. Test Sampling Recommended.
Use for reflective shielding, color coding and identification, plastic coated wallpaper with embossed surfaces, leaders for photo development. Metalized Polyester is also used for decorative trim, graphic and industrial art displays, for toys, appliances, and watercrafts. Can be used as an edging tape for photo preservation, chart presentation and cover art. /Asset/MetalizedMylar1small.jpg
Polyurethane Foam Tape- High Density Foam
(16) Product Description:V2800 series polyurethane foam tapes combine a black polyurethane foam substrate with a high-performance, pressure-sensitive acrylic adhesive on both sides. The polyurethane foam substrate allows energy and stress in the joint to be dissipated over the entire bond. This product is an ideal choice for severe exterior bonding applications, it is durable in all weather conditions and provides resistance against UV light, extreme temperatures, fungi, oxidation and ozone. The V2800 series is specially designed to provide the following features: • Stress distribution reduces pressure points, thereby minimizing distortion • High-performance, durable acrylic adhesive provides a strong, long-lasting bond • Conformable, closed-cell polyurethane foam has excellent environmental resistance • Prevents corrosion of dissimilar materials by eliminating the contact between them.
Common Applications:
Window decoration bars • Emblems and ornamentation • Trailer roof bows • Panel stiffeners • Signs and nameplates • Weather stripping • Body side molding • Composite panels /Asset/Double sided Polyurethane Foam Mounting Tape.jpg
Mylar® Film Tape with Adhesive
(8)Mylar® film tape is constructed from DuPont Mylar® Type A polyester film laminated with an acrylic 300LSE high temperature 3M® adhesive. This polyester tape obtains Mylar® film performance properties including: balanced tensile properties, excellent resistance to moisture and most chemicals, as well as its temperature resistance rated (-100°F to 300ºF). Mylar tape with pressure sensitive acrylic adhesive is recommended for applications that require high initial tack and strong hold adhesion to low surface energy substrates like oily metals or some plastics. Mylar® tape with silicone adhesive can also be produced for applications that require a higher adhesive temperature range and clean release removal. Mylar® film with adhesive creates opportunities to incorporate Mylar® thermoplastic properties into new product developments and or improve existing applications. Utilizing a pressure sensitive adhesive system limits the need for mechanical fastening, enabling Mylar® tape to be used in tight enclosure spaces or placement over hard to drill substrates.
CS Hyde can produce Mylar® Tape in a thickness range from .002” to .014. Utilizing on site converting capabilities we can produce slit to width rolls, sheets, or custom die cut parts. CS Hyde is also an authorized 3M® converter enabling us to acquire and laminate other specialty adhesives for property specific applications. Mylar® adhesive lamination can be produced on one or both sides of the film.
/Asset/mylartape-cshyde.jpgOptically Clear Polyester Tape with Adhesive
(8)Optically clear polyester tape is composed of (48-OC) optically clear polyester film backed with 3M® 200MP Acrylic PSA Adhesive. Optically clear polyester film features great chemical resistance, electrical resistance, tear resistance, dimensional stability, and heat resistance of up to 200°F. 3M™ 200MP adhesive is known for its clarity, excellent temperature resistance, shear strength, and its harsh environment resistance to solvents, cleaning solutions, and disinfectants. Combining the two performance materials creates an optically clear polyester tape with a durable adhesive system.
Optically Clear Polyester Tape Highlights:
- Optically clear polyester film and adhesive both are non-yellowing and hold consistent color. The adhesive color is transparent.
- 200MP adhesive has some initial repositionability bonding to plastic parts (not metal). Which is ideal for graphic overlay applications that need to be lifted and repositioned for perfect alignment.
- Adhesive temperature operating range:
- Short Term (minutes/hours)- 400°F (204°C)
- Long Term (days/weeks)- 300°F (149°C)
Application ideas:
- Optically clear tape barrier protection
- Clear Overlay tape for graphics or label protection
- Clear cable or wire harness wrapping tape for wire identification
Polycarbonate Film Tape with Adhesive
(14)CS Hyde Company now offers two types of high-performance polycarbonate adhesive tapes with 3M pressure sensitive adhesive: type GG (gloss/gloss surface) and type VM (Velvet/Matte surface). Our polycarbonate tapes are composed of clear or translucent polycarbonate films, laminated in house with 3M™ high tack adhesive. We prefer 3M specialty adhesives because they exhibit high temperature performance, clarity, and excellent resistance to harsh environments and perform well in humidity as well as hot/cold cycles. Polycarbonate films have exceptional impact strength, weatherability and thermoformability. With higher strength than acrylic and better dimensional stability than Mylar®, our polycarbonate film is a great all-around high-performance material. Available in .005”, .010", .015", .020" .030" thickness. Combining performance polycarbonate film and 3M adhesive creates a durable weather resistant tape that can be easily installed in any application due to its peel and stick adhesive system.
CS Hyde custom converting solutions include:
- Custom specialty adhesive lamination
- Custom width roll slitting
- Die cut parts, gaskets, or strips
- Custom dimension sheets with or with adhesive backing.
Polyester (PET) Tape with Silicone Adhesive
(24) Polyester (PET) Tape with silicone adhesive is used in high temperature masking. Commonly used in Powder Coating, Spray coating, Plating, Electroplating, Anodizing, and high temperature splicing. Removes cleanly after use. Recommended application temperature to achieve best result is 65F (18C) or above. Proper bonding may not occur unless adhesive and surface material are both at 65F (18C) or above.Kapton® (Polyimide) Tape (-100F to +500F) is used when temperatures are higher than the temperature range of Polyester.
*Request a sample in order to make correct color match. /Asset/vrtypoly.jpg
Self Fusing Silicone Tape
(11)Self-Fusing Silicone Tape is a high performance silicone self adhering wrapping tape. No adhesive is required. SSF Tape is self-adhering, self-fusing & permanent. Once wrapped, It fuses to itself in minutes; cures in 24 hours at room temperature. Faster curing and a harder finish is accomplished by applying heat after wrapping.
All rolls are .020" Thick; Other colors & widths available.
Certifications:
• MIL-I-46852C, Type I & Type II
• A-A-59163, Type I & Type II
• MIL-I-22444C
• Boeing DMS2186 Type 1 & Type 2
• Lockheed Martin MMS J517
• Lockheed Martin 5-00857
• General Electric A50A493
• General Electric A50E112
• General Dynamics P5384
• Rohr RMS315, Type I, II, III
• FAR 25.853 & UL94 (upon request)
/Asset/78-Pack Self Fusing Silicone Tape_1.jpg
Vinyl Tape
(21) Vinyl Tape is resistant to moisture and humidity, and is abrasion-resistant. Because of these characteristics, vinyl PVC Tape has many uses, such as: floor, lane & aisle marking, color coding, identification for safety, and wrapping/insulating air ducts & underground pipes. This tape is highly conformable and has good elongation, while the adhesive is non-corrosive.Available in: Blue, White, Yellow, Black, Red, Green, Orange, and Gray. Applicable Specs: A-A-1689B, Type I, Class 2; PPP-T-66 E, Type I Meets OSHA Color Coding Requirements.
Color Coding System: Brown= Oil; Green= Water; Gray= Steam; Blue= Air; Orange= Electrical; Red= Fire/Flammable; Purple= Acids/Radiation; Yellow= Gases; Black or White= General Purpose-Resistant to acid, alkaloids, oils, moisture, humidity & corrosion. /Asset/Vinyl Tapes Group.jpg
Silicone Strip n' Stick® Tape
(56)Strip n' Stick® Silicone Tape is made of Silicone Sponge, Foam, or Solid Silicone rubber with pressure sensitive adhesive for easy application. Compressible & flexible. Conforms to irregular surfaces, wrap over cylinders or be formed to produce right angles.
Reduces costs of expensive die cut parts or bonding.
Call [800-461-4161] or Email [sales@cshyde.com] for details
Utility Grade Cloth Duct Tape
CS Hyde's 26-Series Tape is an economy grade polyethylene-coated cloth with a natural rubber based adhesive. High tensile strength, excellent moisture resistance, and will bond well to most surfaces with good all climate performance. Tape will conform well to irregular surfaces, and will not twist or curl during application. Tape is hand tearable (cutting tools not required). Tested in accordance with UL 723. Low VOC content. Can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED® /Asset/26_series.jpgAdhesive Remover
(2)This fast-acting citrus based adhesive and mastic remover is derived from a natural citrus peel extract that effectively and safely removes adhesive residue. It’s specifically designed to quickly dissolve the sticky remnants of glues, adhesives, labels, stickers, decals, and inks. Even black mastics and carpet glues quickly liquefy when our adhesive remover is applied. Can be used safely on labeling machinery, screen printing equipment, rollers and cutting blades, windows and glass, and textile equipment.
/Asset/BioBreakdown.jpg