CS Hyde Company supplies and converts a wide variety of high-performance adhesive tapes with pressure sensitive adhesive. Types of adhesive tapes we supply include Teflon™ PTFE fluoroplastic, Kapton® Polyimide, 3M® Adhesives, UHMW Polyethylene, Silicone Strip n Stick, Foil, PEEK, Kynar®, Vinyl, Polyester, Fiberglass, PTFE Coated fiberglass and many more.

Our adhesive tape line is composed of tape products with different and similar performance polymer properties each designed for applications that require specifications like clean release-nonstick, chemical resistance, high temperature resistance, abrasion-impact resistance,  die electric strength, optical clarity, and many other performance attributes.

What makes CS Hyde unique is that we stock these tape products on site in our facility and some products we manufacture in house. We have on site converting capabilities to slit custom width rolls, sheets, and specialty die cut parts or gaskets all produced from our in-house inventory.

Industries Served:

The use of specialty tapes and adhesives spans a full range of industrial, commercial, and home applications. Industries that rely on specialty tapes and adhesives include:

Volume discounts available. Please contact us via email, Chat, or phone 800-461-4161 to discuss volume opportunities.

CS Hyde Company is a worldwide supplier of high performance polymer films. Our plastic films catalog is compiled of semi-crystalline & amorphous thin and thick guage thermoplastic films composed of polymer performance properties including resistance to extreme temperatures, chemicals, moisture, high dielectric strength and flexibility. Common performance films include: ABS, Acetal (Delrin®), ESR Reflective Film by 3M™, FEP, Halar®, HDPE, Hytrel®, Kapton®, PVDF, Mylar®, Polyester, Polycarbonate, PEEK, PES, PFA, Polyimide, PPS, Teflon™ fluoroplastic, TPX®, UHMW, Nylon®, Udel Polysulfone, Ultem®, and many more.

What sets us apart? Low minimums of one lineal foot (on in-stock items) make CS Hyde Company an ideal source for R&D, design, engineering, prototype, laboratory, & universities. CS Hyde stocks our films on site in a climate-controlled facility which enables us to convert and ship within a reasonable lead time. We are also a cost-effective supplier for high volume film customers or films required in custom widths, lengths, or sheets. We welcome the opportunity to discount purchases when higher volumes are involved. CS Hyde ships both domestic and international (depending on product).

Uniquely, CS Hyde can custom convert most of our film products in to to slit width rolls, custom sheet sizing, die-cut parts, bar-code imprinting, and adhesive lamination. View capabilities tab above to learn more.

CS Hyde stocks and converts different types of PTFE coated fiberglass fabrics, silicone coated fiberglass fabrics, and Kevlar® fabrics.

Minimums on Coated Fabrics & non coated fabrics can be as low as one square yard. Custom Die Cuts, Custom parts, Sheets, or belts are also available.

Teflon™ PTFE coated fabrics are madeup  of woven substrates of fiberglass, or Kevlar® fabric and dispersion coated or impregnated with PTFE. All PTFE coated fabrics have excellent release properties, high temperature, chemical, moisture & tear resistance, dimensional & mechanical stability, low coefficient of friction and superior dielectric properties. 

Types of PTFE Coated Fiberglass Fabrics:

• Standard Grade
• Ultra-premium grade
• Mechanical Grade
• Tear & Crease Resistant
• Anti-Static

Semi Porous or Porous PTFE coated fiberglass fabrics are composed of semi porous or porous woven fiberglass fabrics coated with PTFE.

• Porous PTFE coated Fiberglass Mesh Fabrics are commonly used as cooking sheets to replace wire racks or constructed as dryer belts. Available in mesh openings of 1/8", 3/16" & 1/4", .313" Mesh.
• Semi Porous PTFE coated fiberglass fabric- has a light coating of PTFE, ideal for “bleeder cloth applications” or embossment sheets.

Controlled Porosity PTFE Fiberglass fabric or (CPM) Controlled Porosity Membrane is a white porous composite material consisting of fiberglass and PTFE impregnation. Ideal for industrial and architectural applications requiring air flow. *CPM is also the most flexible PTFE coated fiberglass out of all the types.

PTFE Laminate fabrics (TEF-LAM) are fiberglass woven substrates that are laminated with PTFE coating.

• PTFE laminates last 2-3 x longer than traditional PTFE coated fabrics.

Kevlar® Aramid Fabrics are available with or with out PTFE Coating.

Silicone Coated Fiberglass Fabrics are composed of woven fiberglass fibers coated with silicone rubber.

• Silicone Coated Fiberglass Fabric is available with silicone coating on one or both sides or bonded together to create 1,2 or 3 ply fabrics.

Teflon™ Fluoropolymer is a trademark of The Chemours Company FC, LLC used under license by CS Hyde Company.

CS Hyde is a supplier of Silicone Strip N Stick Tape also known as “silicone gasket tape”. These tapes have a carrier made from a closed-cell silicone sponge, fiberglass reinforced sponge, solid silicone, or low-density foam substrate. These gasket tapes are available with a silicone or acrylic adhesive backing protected by a peel-off liner. Strip-N-Stick® Tape offers superior service life, excellent conformability, flexibility and a service temperature ranging from -100°F to + 500°F (-73°C to + 260°C).  Other benefits include a low compression set and high adhesion to a variety of substrates. Strip n stick gaskets tapes can be used for high and low temperature resistance, enclosure or door gasketing, vibration dampening, and thermal insulation. Gasket tapes are unique because they can conform to irregular surfaces, wrap over or around cylinders, or be formed to produce right angles. Strip n stick tapes are a cost-effective solution for one application use or a gasket not requiring custom tooling or intricate parts.

CS Hyde supplies strip n stick tape in widths ranging from .5”-2” wide in a variety of thicknesses and durometers. To learn more about the features of each gasket tape view options below. Order online- no minimum order quanity.

CS Hyde Company is a top choice converter of 3M™ Adhesive products including 3M™ VHB™ Tapes, Transfer adhesives, and specialty plastics laminated with 3M™ adhesives. All our 3M™ products are available in slit to width rolls, sheets, or die cut parts.

Do you need one of these specialty 3M™ adhesives laminated to another substrate?
We laminate many of these 3M™ adhesives to create some of our performance specialty film tapes like our PEEK® Tape, Ultem® Tape, Polycarbonate tape, and many more. We even get outside our core stock materials and laminate 3M™ adhesives to customer supplied substrates, common examples include sheet metal, and thin gauge spring steel. Custom fastening solutions like this are a great alternative to mechanical fastening and in some case provide a better seal than mechanical fastening options.  

Below are common die parts that we stock. This selection of die cuts is ideal for peel and stick applications because they are produced on a removable liner. We specialize in creating custom die cut solutions for almost any application. Our performance material line helps us find a product that will ensure reliability and functionality of your design.

CS Hyde Company offers design assistance, prototype and short production runs, high volume production and inspection or quality control.  We can assist with concepts, manufacturing costs and techniques and material recommendations.  We can also help with upgrading or redesigning of existing materials and products to increase performance and reduce costs.

Need a different size or custom parts? Request Quote Now