- All Categories
- Adhesive Tapes
- PTFE Tapes made with Teflon™ fluoropolymers
- UHMW Polyethylene Tape
- Kapton® (Polyimide) Tape
- Teflon™ PTFE Coated Fiberglass Tapes
- Silicone Strip n Stick® Tape- Gasket Tape
- Fiberglass Tape (Woven Glass Cloth Tape)
- Thermal & Plasma Flame Spray Masking Tape
- Specialty Film Tapes
- Clear/Transparent Adhesive Tapes
- 3M™ Adhesive Transfer Tapes- Rolls & Sheets
- 3M™ VHB Tape- 4941/4905- Rolls & Sheets
- Foil Tapes & (AFD) Foil Tape Discs
- Double Sided Adhesive Tapes
- Delrin® Tape with Adhesive
- FEP Optically Clear Tape made with Teflon™ fluoropolymers
- Rulon® Tape with Adhesive (bearing tape)
- FST Tape made with Teflon™ fluoropolymers
- Kevlar® / Aramid Fiber Tape with PSA Adhesive
- Metalized Polyester Tape
- Polyurethane Foam Tape- High Density Foam
- Mylar® Film Tape with Adhesive
- Optically Clear Polyester Tape with Adhesive
- Polycarbonate Film Tape with Adhesive
- Polyester (PET) Tape with Silicone Adhesive
- Self Fusing Silicone Tape
- Vinyl Tape
- Silicone Strip n' Stick® Tape
- Utility Grade Cloth Duct Tape
- Adhesive Remover
- Electrical Tape
- High Performance Polymer Films
- ABS Film
- Acetal (Polyoxymethylene) POM Film
- Delrin® Film
- Anti-Static UHMW Film (BLACK)
- 3M™ ESR Reflector Film
- FEP & PFA Optically Clear Film made with Teflon™ fluoropolymers
- HALAR® ECTFE Film
- HDPE Polyethylene Film (High Strength)
- Hytrel® (TPE) Film
- Aluminum Polyimide Film
- Thick Polyimide Film
- Cirlex® Kapton® Film
- Kapton® (Polyimide) Film - Type FN
- Kapton® (Polyimide) Film - Type HN
- Kapton® (Polyimide) Film - Type XC
- Kapton® (Polyimide) Film - Type MT
- Kapton (Polyimide) Film- Type FPC
- Mylar® Polyester (PET Film)
- Optically Clear PETG Film
- Optically Clear Polyester Film Rolls
- Metalized Polyester PET film
- Nylon 6/6 Film
- PEEK™ Film
- ULTEM® PEI (Polyetherimide Resin) Film
- PES ULTRASON (Polyethersulfone Resin) Film
- Polycarbonate Film- Clear & Velvet Matte
- Polypropylene (PP) Film
- PPS Film (Polyphenylene sulfide)
- PSU / UDEL® Film (Polysulfone Resin) FDA Compliant, Transparent
- PVDF / KYNAR® (Polyvinylidene Fluoride Resin) Film
- PTFE Film made with made with Teflon™ fluoropolymers
- Tefzel® (ETFE) Optically Clear Film (General Purpose Grade)
- TPX® Polymethylpentene Film
- UHMW Polyethylene Film
- Teflon™ PTFE Coated Fabrics & Non-Coated Fabrics
- Standard Grade- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers (42)
- Ultra Premium Grade- PTFE Coated Glass Fabric made with made with Teflon™ fluoropolymers
- Mechanical Grade- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Tear & Crease Resistant- PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Kevlar® Fabric
- Black Anti-Static PTFE Coated Glass Fabric made with Teflon™ fluoropolymers
- Tef-Lam Fiberglass PTFE Laminate Fabric
- Controlled Porosity PTFE Fabric
- Silicone Coated Fiberglass Fabric
- Silicone Coated 1 Side / Wash Coat Fabric
- 2 Ply Textured Silicone Coated Fiberglass Fabric
- 3 Ply Textured Silicone Coated Fiberglass Fabric
- Kevlar® Aramid Fabric
- Semi Porous Fiberglass Fabric made with Teflon™ fluoropolymers
- Porous PTFE Mesh Belting
- Kevlar® fabric Coated with PTFE
- Silicone Rubber Sheeting
- Commercial Grade Solid Silicone Rubber Sheet
- FDA Approved Solid Silicone Rubber Sheet
- Translucent Solid Silicone Rubber Sheet
- Medical Grade Solid Silicone Rubber Sheet
- Specification Grade Solid Silicone Rubber Sheet
- Fiberglass Reinforced Solid Silicone Rubber Sheet
- Flame Retardant Solid Silicone Rubber Sheet
- Solid Silicone (Fluorosilicone) Rubber Sheet
- Electrically Conductive Solid Silicone Rubber Sheet
- High Temperature Solid Silicone Rubber Sheet
- High Strength Solid Silicone Rubber Sheet
- Thermally Conductive Solid Silicone Rubber Sheet
- Flame Retardant Silicone Foam
- Commercial Grade Silicone Sponge Rubber Sheet
- Flame Retardant Silicone Sponge Rubber Sheet
- Fiberglass Reinforced Silicone Sponge Rubber Sheet
- Low Compression Set Silicone Sponge Rubber Sheet
- Thermally Conductive Silicone Sponge Rubber Sheet
- Silicone Coated Fiberglass Fabric
- Silicone Coated 1 Side / Wash Coat Fabric
- 2 Ply Textured Silicone Coated Fiberglass Fabric
- 3 Ply Textured Silicone Coated Fiberglass Fabric
- Silicone Strip n Stick® Tape- Gasket Tape
- Silicone Strip n' Stick® Tape
- Self Fusing Silicone Tape
- Silicone Strip n Stick® Tape- Gasket Tape
- Strip-N-Stick medium density silicone sponge w/ silicone adhesive- 7-100S
- Strip-N-Stick medium density silicone sponge w/ acrylic adhesive- 7-200A
- Strip-N-Stick fiberglass reinforced sponge w/ acrylic adhesive- 7-300AR
- Strip-N-Stick solid silicone rubber 30 duro w/ acrylic adhesive- 7-440A
- Strip-N-Stick solid silicone rubber 30 duro w/ silicone adhesive- 7-440S
- Strip-N-Stick grey flame resistant silicone foam w/ acrylic adhesive- 7-512AF
- 3M™ Adhesive Products
- Threads, Cords, Kevlar, VELCRO®
- PTFE Belting
- Porous PTFE Mesh Belting
- Standard Grade Fiberglass Tape made with Teflon™ fluoroplastic
- Anti-Static fabric made with Teflon™ fluoroplastic
- Semi Porous Fiberglass Fabric made with Teflon™ fluoropolymers
- Silicone Coated Fiberglass Fabric
- Ultra Premium Fiberglass Fabric made with Teflon™ fluoroplastic
- Kevlar® Premium Grade Fabric Coated with PTFE
- Tef-Lam Fiberglass Fabric Laminated with PTFE
- Teflon™ PTFE fluoropolymer Products
- Teflon™ PTFE Sheets, Rods and Rectangles
- 3D Printing Materials
- Application Specific
- Clear Plastic Films for Face Shields, Sneeze Guards, Sanitary Barriers
- Abrasion/Impact Resistance
- Chemical Resistance
- Dielectric Strength
- Flame Resistance
- FDA Approved Substrates
- Medical Grade Products
- Low Friction Heat Sealer Tapes
- Clear-Transparent: Plastic Products
- 3D Printing Materials
- Stock Plastic Film & Tape Sheets
- Stock Die-Cut Parts- Dots, Squares, Washers
- Thermal & Plasma Flame Spray Masking Tape
- C4-NGEN® Mousepads & Gear
- Other Applications
- More Products
- PTFE Beading (Cord), small diameter
- PTFE Lacing Tape (Flat Braid)
- PTFE Tie Cord (Round Braid)
- PTFE Thread Seal Tape
- Kevlar® Thread
- Nylon Thread (Bonded)
- Polyester Anti-Static Conductive Thread
- Polyester Thread (Bonded)
- PTFE Coated Fiberglass Thread
- PTFE coated Quartz Thread
- Polycarbonate (Machine Grade)
- 56-HKIT
- 56-HS-9
- Tacking Iron Models
- Sale Specials
- Stock Die-Cut Parts- Dots, Squares, Washers
- Converting & Sheeting
- Adhesive Tapes
UHMW Polyethylene Tape
UHMW tape or (Ultra High Molecular Weight Polyethylene) tape is made of a high-performance thermoplastic film that is strong and versatile due to its high abrasion, impact, and wear resistance. UHMW tape is unique because it also has a non-stick, low friction surface similar to Telfon® PTFE but more durable due its abrasion resistance. These performance properties enable UHMW tape to be utilized for sound dampening or eliminating squeaks and rattles caused by adjacent part movement. Due to its properties many names can be associated with UHMW tape including: Slippery tape, Low-friction tape, Chute Tape, or Slick tape among different applications or industry.
Improve packaging- UHMW tape is widely utilized within the packaging industry specifically on conveyor systems because they are built with many adjacent moving pieces and have multiple locations that friction and abrasion occur. UHMW tape can be used to improve chutes, liners, and rail guide systems enabling boxes, products, or goods to move freely preventing jams and a potential line shut down.
Improve Surface Protection- UHMW Tape is effective as surface protection to improve worn down or sticking surfaces. UHMW’s slippery surface and impact and abrasion resistance makes this tape a great option to enhance different types of surfaces and bearings. The adhesive backing allows for easy peel stick installation eliminating the need for mechanical fastening. High Bond UHMW Tape adheres suitably to metallic or low surface energy surfaces including plastics, powder-coats, foams, and oily metals. Example applications include roller bearings, work benches, shipping tables, toolboxes or anywhere abrasion and impact could be detrimental.
Reduce Friction- UHMW tape can be used to reduce friction due to it slippery surface. This can be beneficial on several types of machinery that incorporate sliding components. For example, UHMW tape is commonly used in the woodworking industry on table saws and jigs to improve the sliding ability of the guide rails. It can also be utilized in building or home fabrication to reduce friction and improve functionality of door jams, windowsills, sliding doors, drawer slots, kitchen cabinets, and numerous other applications where friction becomes a problem.
CS Hyde supplies and converts several types of low friction UHMW tapes including:
High-Bond Acrylic UHMW Tape, Standard Acrylic UHMW Tape, Rubber adhesive UHMW Tape, Black Anti-Static UHMW Tape
UHMW Tape is available in sheets, specific widths, or custom die cut parts.
PTFE Tapes made with Teflon™ fluoropolymers
CS Hyde is a supplier and converter of PTFE Tapes made with Teflon™ Fluoroplastic. PTFE (Teflon®) is one of the most chemically inert materials available and it does not support combustion, has a low coefficient of friction, and there are few substances that will stick to its surface. CS Hyde PTFE tapes have unique properties including non-stick, anti-friction, anti-static, high temperature resistance, and chemical resistance. PTFE tapes can either be coated with Teflon™ PTFE or constructed from skived or tensilized PTFE Film. Skived PTFE Tape is made by slicing natural PTFE into layers to achieve nominal thickness. Tensilized PTFE is made by stretching PTFE Fibers, this process helps create PTFE tape with high density or high tensile strength.
The most common PTFE coated tape is PTFE Coated Fiberglass or also know as “PTFE heat tape”. PTFE Fiberglass tapes consist of woven fiberglass fibers coated with Teflon™ PTFE. These tapes are widely used in packaging applications on heat sealers to seal bags or other similar products. PTFE Coated Fiberglass tapes are available with different grades of coating including: Standard and Ultra-Premium grade with either silicone or acrylic adhesive. Other PTFE coated tapes include Optically clear FEP Tape, FST Tape, R-Tape (Roller Tape), Para-Arimid Kevlar® Tape and TFL Laminate Tape.
CS Hyde supplies skived PTFE tape with high bond acrylic, standard acrylic and silicone adhesive in a thickness range (.002” to .010”). Thick gauge PTFE tape or “FAT” PTFE Tape is also available in a thickness ranges (.020”-.125”) with either acrylic or silicone adhesive.
Teflon™ Fluoroplastic is a trademark of The Chemours Company FC, LLC used under license by CS Hyde Company.
PTFE Tapes made with Teflon™ Fluoroplastic are available in slit to width rolls, sheets, and die cut parts. All stock products are available for same day shipping. CS Hyde offers discounts on quantity orders, and little to no minimums on custom orders.
/Asset/FATptfetape.jpgTeflon™ PTFE Coated Fiberglass Tapes
Teflon™ PTFE coated fiberglass tapes are made up of fiberglass fabric tighly woven from fiberglass fibers, then coated with Teflon™ PTFE. Fiberglass fabric provides superior dimensional stability while PTFE coating provides a slippery, anti-friction release surface. PTFE Coated fiberglass tape are an excellent product for various packaging applications requiring release properties, extreme temperatures (up to 500ºF), chemical, and environmental resistance. PTFE coated fiberglass can be used to cover heat sealing jaws and elements on various types of equipment such as shrink wrap/L bar, blister packaging, and form/fill/seal machines. Available in standard or premium grade fiberglass, with silicone or acrylic adhesive, with or without peel-off liner. For applications not requiring adhesive backing we also supply Teflon™ PTFE coated fiberglass fabric by the lineal yard. Thicknesses ranging from .003” to .019”.
Standard Grade VS. Ultra Premium Grade Coated Fiberglass Tapes
The main difference between standard grade and premium grade coated fiberglass tapes is the grade of the fiberglass fibers and the amount of PTFE Coating. Our ultra-premium grade (10-SX and 10-AX Series) are composed of higher-grade fiberglass fibers and an extra coating of Teflon™ PTFE.
Silicone VS Acrylic Adhesive Systems
Silicone adhesive
- Recommend for high temperature applicationsIdeal for requiring clean release adhesive removal
- Silicone Adhesive rated up to 500°F
Acrylic Adhesive
- Recommended for moderate temperature applications
- Acrylic Adhesive rated -40°F to 375°F
- Ideal for applications requiring high initial tack and strong bond adhesion.
Teflon™ Fluoroplastic is a trademark of The Chemours Company FC, LLC used under license by CS Hyde Company.
/Asset/PTFEtapes.jpgPEEK Tape with Adhesive
(40)PEEK Tape with silicone or acrylic adhesive
PEEK Tape is composed of two high performance materials: high temperature, chemical resistant, abrasion and wear resistant PEEK™ Film (002" to .010" thick) and 3M™ specialty adhesives (nominal adhesive thickness of .0015 to .002") in silicone adhesive (rated up to 500°F), acrylic adhesive (High tack-High Bond) or 5 mil. conductive filled acrylic adhesive (ideal for EMI/RFI shielding applications). Utilizing our in-house lamination services, we can produce PEEK Tape with a specialty adhesive fastening system to meet the requirements of your application and utilize PEEK polymer performance properties.
When compared to Teflon™ PTFE tapes, PEEK tape exhibits a much higher tensile strength (18.9 kpsi / 130 MPa), making it a tougher, stronger material with better wear performance, and a lower density. When compared to Kapton® Polyimide tape, PEEK tape has lower moisture absorption (.04%/24 hr.), a higher tear strength (35g/mil.), making it a better performance option for barrier protection applications in hot/humid environments. The acrylic adhesive (37-A Series) laminated to PEEK™ film also distributes humidity, UV, and water resistance if applied correctly.
PEEK film can meet a variety of aerospace, automotive, food/water (FDA 21 CFR 177.2415), medical/pharmaceutical, and military/nuclear approvals, and standards.
37-A PEEK Tape (Acrylic Adhesive):
- Excellent bond to low surface energy plastics such as, polypropylene and powder coatings.
- Excellent adhesion to lightly oiled surfaces typical of machine parts.
Temperature Resistance:
- usable for short periods (minutes, hours) at temperatures up to 300°F (148°C)
- intermittent longer periods of time (days, weeks) up to 200°F (93°C).
37-A-9712 PEEK Tape (Conductive Filled Acrylic Adhesive):
- Performance acrylic electrical adhesive loaded with conductive fibers
- Ideal for attaching EMI shields to electronic and electrical devices.
- Compared to mechanical fastening like screws or bolts, 3M® 9712 adhesive provides reduced assembly time and a solid bond line with no gaps which might result in EMI Emission.
Temperature resistance:
- Short Term Exposure (minutes hours): 250°F (121°C)
- Long Term Exposure (days, weeks): 158°F (70°C)
37-S PEEK Tape (Silicone Adhesive):
- Silicone Adhesive provide high bond strength to most silicones and difficult-to-bond to substrates like stainless steel or silicone, including many low surface energy plastics ex. Polycarbonate.
- Superior Temperature Performance
- Recommended for applications that require tape to be removable.
Maximum Temperature Resistance: up to 500°F (260°C)